PIR Board
About the PIR Board
PIR Board is an open source PCB design by danieltith, published on GitHub. It is a 2-layer board measuring 20.3 × 35.3 mm, with 8 components from 6 distinct parts.
Other key parts include the AMN32111. By type, the board carries 5 resistors, 2 connectors and 1 IC.
From the project
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
[Link to be inserted once publicly available]
Brown LA, Hasan S, Foster RG and Peirson SN. COMPASS: Continuous Open Mouse Phenotyping of Activity and Sleep Status [version 2; peer review: 4 approved]. Wellcome Open Res (2017) 1:2. (https://doi.org/10.12688/wellcomeopenres.9892.2)
Main components on the PIR Board
PIR Board bill of materials (BOM)
8 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMN32111 Recom Power | AMN33111 | U1 |
| 1 | 54601-908WPLF Amphenol ICC (Commercial Products) | 54601908WPLF | J1 |
| 1 | 530470410 Conn_01x08_Female Molex | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 2 | 6K2 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R5 |
| 2 | 10K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R4 |
| 1 | LDR03 | PinSocket_1x02_P2.54mm_Vertical | R3 |
PIR Board design files
The KiCad project lives in the danieltith/Neuroscience repository on GitHub; these links point at the commit this page was built from.
PIR Board: common questions
How big is the PIR Board?
The PIR Board measures 20.3 × 35.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PIR Board?
8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PIR Board design files?
From the danieltith/Neuroscience repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PIR Board design in my own project?
The repository has no license, so all rights stay with danieltith. Use it as a reference, and ask the author before reusing the design.
More boards in Neuroscience
BreakoutV1.0
150 × 39 mm80 parts4LNo license0
BreakoutV1.0 removed solder paste
150 × 39 mm80 parts4LNo license0
NosepokeV1.0
28 × 45 mm25 parts2LNo license0
NosepokeV1.0 paste removed
28 × 45 mm25 parts2LNo license0
Eib-16
15 × 10 mm21 parts4LNo license0
AVR/ArduinoPIR InterfaceBoard
106.9 × 53 mm4 parts2LNo license0