HardLabs

PIR InterfaceBoard

danieltith·Neuroscience·Operant/PIR_Interface/KiCAD Files/PIR InterfaceBoard.kicad_pcb

PIR InterfaceBoard PCB layout, top view — open source AVR/Arduino board by danieltith

About the PIR InterfaceBoard PCB

PIR InterfaceBoard is an open source AVR/Arduino PCB design by danieltith, published on GitHub. It is a 2-layer board measuring 106.9 × 53 mm, with 4 components from 4 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 3 connectors and 1 module.

From the project

Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".

Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".

[Link to be inserted once publicly available]

Brown LA, Hasan S, Foster RG and Peirson SN. COMPASS: Continuous Open Mouse Phenotyping of Activity and Sleep Status [version 2; peer review: 4 approved]. Wellcome Open Res (2017) 1:2. (https://doi.org/10.12688/wellcomeopenres.9892.2)

Main components on the PIR InterfaceBoard

Arduino_Nano_v3.x

PIR InterfaceBoard bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino_Nano_v3.x
A1
1
SS73100-046F
Amphenol ICC (Commercial Products)
J1
1
530470410
Conn_01x02_Female
Molex
J2
1
530470410
Conn_01x03_Female
Molex
J3

PIR InterfaceBoard design files

The KiCad project lives in the danieltith/Neuroscience repository on GitHub; these links point at the commit this page was built from.

PIR InterfaceBoard: common questions

What microcontroller does the PIR InterfaceBoard use?

The PIR InterfaceBoard is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the PIR InterfaceBoard PCB?

The PIR InterfaceBoard measures 106.9 × 53 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PIR InterfaceBoard?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PIR InterfaceBoard design files?

From the danieltith/Neuroscience repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PIR InterfaceBoard design in my own project?

The repository has no license, so all rights stay with danieltith. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PIR InterfaceBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Neuroscience

Similar boards