Placa Carga
danielvie·doutorado·embedded/kicad/PlacaDaniel/Placa_AmplificadorInstrumentacao/Placa_Carga.kicad_pcb
About the Placa Carga PCB
Placa Carga is an open source PCB design by danielvie, published on GitHub. It is a 2-layer board measuring 25 × 25 mm, with 12 components from 8 distinct parts.
Other key parts include the LM324. By type, the board carries 8 resistors, 2 capacitors, 1 IC and 1 connector.
From the project
Workspace do projeto de doutorado para controle em tempo real com ESP32.
Workspace do projeto de doutorado para controle em tempo real com ESP32.
- esp32idf/ — firmware ESP-IDF, protocolo BLE, interface web e documentação técnica do controlador de sinais. - kicad/ — fontes das placas, bibliotecas de footprints/símbolos e arquivos de fabricação. - docs-hardware/ — pinagens, diagramas de conexão e datasheets de referência. - testsespressif/ — experimentos independentes com ESP32/PlatformIO.
Main components on the Placa Carga
Placa Carga bill of materials (BOM)
12 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324 | DIP-14_W7.62mm | U1 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 2 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C7 |
| 1 | 33k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 4 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6 |
| 1 | 56k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 15k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 5k6 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
Placa Carga design files
The KiCad project lives in the danielvie/doutorado repository on GitHub; these links point at the commit this page was built from.
Placa Carga: common questions
How big is the Placa Carga PCB?
The Placa Carga measures 25 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Placa Carga?
12 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Placa Carga design files?
From the danielvie/doutorado repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Placa Carga design in my own project?
The repository has no license, so all rights stay with danielvie. Use it as a reference, and ask the author before reusing the design.