TKL Keyboard
Danimal2k·TKL_Keyboard
About the TKL Keyboard PCB
TKL Keyboard is an open source STM32 PCB design by Danimal2k, published on GitHub. It is a 2-layer board measuring 372.7 × 125.1 mm, with 216 components from 23 distinct parts.
Its main chip is the STM32F303C8TX, from the STM32 family. Other key parts include the XC6206PXXXMR. By type, the board carries 93 diodes, 15 capacitors, 8 resistors, 2 ICs, 2 connectors and 2 switches.
It belongs with the keyboards designs in this gallery.
Main components on the TKL Keyboard
TKL Keyboard bill of materials (BOM)
216 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206PXXXMR XC6206PxxxMR | SOT-23-3 | U2 |
| 1 | STM32F303C8TX STM32F303C8Tx | LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | 16MHZ 16MHz | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4085_CUSTOM | J1 |
| 1 | CONN_01X05_MALE Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 87 | MX_SW_HS | MXOnly-1U-Hotswap | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +79 |
| 1 | MX_SW_HS | MXOnly-2U-Hotswap | MX31 |
| 2 | MX_SW_HS | MXOnly-2.25U-Hotswap | MX66, MX69 |
| 1 | MX_SW_HS | MXOnly-2.75U-Hotswap | MX80 |
| 1 | MX_SW_HS | MXOnly-6.25U-Hotswap-ReversedStabilizers | MX93 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 93 | D_Small | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +85 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 2 | 22UF 22uF | C_0805_2012Metric | C1, C2 |
| 2 | 30PF 30pF | C_0402_1005Metric | C3, C4 |
| 1 | 10UF 10uF | C_0805_2012Metric | C5 |
| 7 | 100NF 100nF | C_0402_1005Metric | C6, C7, C8, C9, C13, C14, C15 |
| 1 | 10NF 10nF | C_0402_1005Metric | C10 |
| 2 | 1UF 1uF | C_0402_1005Metric | C11, C12 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1K 5.1k | R_0805_2012Metric | R1, R2 |
| 5 | 10K 10k | R_0805_2012Metric | R3, R4, R5, R6, R8 |
| 1 | 1.5K 1.5k | R_0805_2012Metric | R7 |
TKL Keyboard design files
The KiCad project lives in the Danimal2k/TKL_Keyboard repository on GitHub; these links point at the commit this page was built from.
- LayoutTKL_Keyboard.kicad_pcb
- SchematicTKL_Keyboard.kicad_sch
- BOMTKL_bom.csv
TKL Keyboard: common questions
What microcontroller does the TKL Keyboard use?
The TKL Keyboard is built around the STM32F303C8TX, from the STM32 family.
How big is the TKL Keyboard PCB?
The TKL Keyboard measures 372.7 × 125.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TKL Keyboard?
216 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TKL Keyboard design files?
From the Danimal2k/TKL_Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TKL Keyboard design in my own project?
The repository has no license, so all rights stay with Danimal2k. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TKL Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k