Rabbit
About the Rabbit PCB
Rabbit is an open source PCB design by DanNixon, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 64.6 × 46.2 mm, with 4 components from 3 distinct parts.
Other key parts include the ZD24C64A. By type, the board carries 2 resistors, 1 IC and 1 diode.
It belongs with the wearables designs in this gallery.
From the project
Hexpansions for the EMF Camp Tildagon badge
- LED red: LS E/5 - LED green: LS C/3 - LED blue: LS D/4
- ZD24C64A EEPROM - 0805 4.7kOhm resistors - 5mm RAGB LED
Main components on the Rabbit
Rabbit bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ZD24C64A | TSSOP-8_4.4x3mm_P0.65mm | U1 |
| 1 | LED_RAGB | LED_D5.0mm-4_RGB | D1 |
| 2 | 4k7 | R_0603_1608Metric | R1, R2 |
Rabbit design files
The KiCad project lives in the DanNixon/hexpansions repository on GitHub; these links point at the commit this page was built from.
- Layoutrabbit/rabbit.kicad_pcb
- Schematicrabbit/rabbit.kicad_sch
Rabbit: common questions
How big is the Rabbit PCB?
The Rabbit measures 64.6 × 46.2 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Rabbit?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rabbit design files?
From the DanNixon/hexpansions repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rabbit design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which DanNixon chose for the repository.
More boards in hexpansions
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k