Makerspace badge

DanNixon·hexpansions·makerspace-badge/makerspace-badge.kicad_pcb

About the Makerspace badge PCB

Makerspace badge is an open source PCB design by DanNixon, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 67.9 × 53.2 mm, with 74 components from 5 distinct parts.

Other key parts include the ZD24C64A and AW9523B. By type, the board carries 66 diodes, 3 ICs, 3 resistors and 2 capacitors.

It belongs with the wearables designs in this gallery.

From the project

Hexpansions for the EMF Camp Tildagon badge

The Maker Space M logo, surrounded by red LEDs with some breakouts on the bottom in the shape of the full logo.

Segments start at 1, with 1 being the bottom of the valley at the top of the M with subsequent segments advancing in clockwise order from there.

- ZD24C64A EEPROM - AW9523BTQR LED driver - 0805 4.7kOhm resistors - 0603 1uF capacitors - 0603 red LEDs

Main components on the Makerspace badge

ZD24C64A AW9523B

Makerspace badge bill of materials (BOM)

74 components, 5 distinct parts.

Qty	Part	Footprint	Refs
1	ZD24C64A	TSSOP-8_4.4x3mm_P0.65mm	U1
2	AW9523B	QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.6mm	U2, U3
66	LED	LED_0603_1608Metric_NoSilkscreen	D1, D2, D3, D4, D5, D6, D7, D8 +58
2	1uF	C_0603_1608Metric	C1, C2
3	4k7	R_0805_2012Metric	R1, R2, R3

Makerspace badge design files

The KiCad project lives in the DanNixon/hexpansions repository on GitHub; these links point at the commit this page was built from.

Layoutmakerspace-badge/makerspace-badge.kicad_pcb
Schematicmakerspace-badge/makerspace-badge.kicad_sch

Makerspace badge: common questions

How big is the Makerspace badge PCB?

The Makerspace badge measures 67.9 × 53.2 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Makerspace badge?

74 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Makerspace badge design files?

From the DanNixon/hexpansions repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Makerspace badge design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which DanNixon chose for the repository.

More boards in hexpansions

Similar boards