Glowprism pipe
dannyandreev·glow-prism·Electrical/glowprism_pipe_pcb/glowprism_pipe_pcb.kicad_pcb
About the Glowprism pipe PCB
Glowprism pipe is an open source PCB design by dannyandreev, published on GitHub. It is a 2-layer board measuring 35 × 35 mm, with 27 components from 13 distinct parts.
Other key parts include the 74LVC1G125 and AZ1117-5.0. By type, the board carries 8 resistors, 7 connectors, 4 jumpers, 4 diodes, 2 ICs and 2 capacitors.
Main components on the Glowprism pipe
Glowprism pipe bill of materials (BOM)
27 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LVC1G125 | SOT-353_SC-70-5 | U1 |
| 1 | AZ1117-5.0 | SOT-223-3_TabPin2 | U2 |
| 5 | Conn_01x03_Pin | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1, J2, J3, J4, J5 |
| 1 | Conn_01x03_Socket | amass mr30 | J6 |
| 1 | Conn_01x03_Pin | amass mr30 | J7 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | SolderJumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4 |
| 2 | WS2812 | LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D2 |
| 2 | LED | D_0805_2012Metric | D3, D4 |
| 2 | 1uF | C_0805_2012Metric | C1, C2 |
| 6 | 33 | R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 1 | 10k | R_0805_2012Metric | R7 |
| 1 | 3k3 | R_0805_2012Metric | R8 |
Glowprism pipe design files
The KiCad project lives in the dannyandreev/glow-prism repository on GitHub; these links point at the commit this page was built from.
Glowprism pipe: common questions
How big is the Glowprism pipe PCB?
The Glowprism pipe measures 35 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Glowprism pipe?
27 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Glowprism pipe design files?
From the dannyandreev/glow-prism repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Glowprism pipe design in my own project?
The repository has no license, so all rights stay with dannyandreev. Use it as a reference, and ask the author before reusing the design.