HardLabs

Arduino ir relay

danshick·arduino-ir-relay

Arduino ir relay PCB layout, top view — open source AVR/Arduino board by danshick

About the Arduino ir relay PCB

Arduino ir relay is an open source AVR/Arduino PCB design by danshick, published on GitHub. It is a 2-layer board measuring 55.9 × 69.9 mm, with 16 components from 11 distinct parts.

Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. By type, the board carries 5 connectors, 4 capacitors, 2 resistors and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

Schematic, PCB, custom footprints, plots, and code for an arduino based remote control relay rig

Kicad --- Kicad files for schematic, PCB, footprints, and gerber/drill files for the project

PlatformIO --- code folder contains PlatformIO project for compatible arduino code

Arduino ir relay, from the project README
From the project README

Arduino ir relay bill of materials (BOM)

16 components, 11 distinct parts.

QtyPartRefs
1
Screw_Terminal_01x02
J0
4
Conn_02x03_Row_Letter_First
J1, J2, J3, J4
1
ATMEGA328P-PU
ATMEGA1
1
16Mhz
CLK1
1
TSOP343xx
IR1
1
L7805
VREF1
1
LED
D1
2
10u
C1, C2
2
22p
C3, C4
1
220
R1
1
10k
R2

Arduino ir relay design files

The KiCad project lives in the danshick/arduino-ir-relay repository on GitHub; these links point at the commit this page was built from.

Arduino ir relay: common questions

What microcontroller does the Arduino ir relay use?

The Arduino ir relay is built around the ATMEGA328P-PU, from the AVR/Arduino family.

How big is the Arduino ir relay PCB?

The Arduino ir relay measures 55.9 × 69.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino ir relay?

16 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino ir relay design files?

From the danshick/arduino-ir-relay repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Arduino ir relay design in my own project?

The repository has no license, so all rights stay with danshick. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino ir relay without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards