FancyBoard
darshg321·FancyBoard·pcb/FancyBoard.kicad_pcb
About the FancyBoard PCB
FancyBoard is an open source PCB design by darshg321, published on GitHub. It is a 2-layer board measuring 338.3 × 116.8 mm, with 179 components from 19 distinct parts.
Other key parts include the nice!nanov2, ST7789_MODULE and MCP23017_SO. By type, the board carries 81 switches, 78 diodes, 11 resistors, 4 ICs, 4 capacitors and 1 connector.
It belongs with the keyboards and power & battery designs in this gallery.
From the project
a hot-swappable, low-profile mechanical keyboard made from scratch
FancyBoard is a custom hot-swappable mechanical keyboard inspired by the k.no.b.1 from Work Louder.
- Hot Swappable - BlueMicro Firmware - Low Profile - Bluetooth & USB-C - 1.9" IPS Display - 65% layout - 2 Dials
i wanted to learn how to make a full keyboard after hackpad anyways, so i designed this. i also want a bluetooth keyboard because my current keyboard has a cable thats very annoying, and i wanted to replace it.

Main components on the FancyBoard
FancyBoard bill of materials (BOM)
179 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | nice!nanov2 | nice!nanov2 | U1 |
| 1 | ST7789_MODULE ST7789_Module | ST7789_Module | U2 |
| 2 | MCP23017_SO | SOIC-28W_7.5x17.9mm_P1.27mm | U3, U4 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | SW_Push_45deg | Kailh-PG1353-Hotswap-1.5U | SW1 |
| 65 | SW_PUSH_45DEG SW_Push_45deg | Kailh-PG1353-Hotswap-1U | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +57 |
| 3 | SW_PUSH_45DEG SW_Push_45deg | Kailh-PG1353-Hotswap-1.5U | SW14, SW29, SW42 |
| 1 | SW_PUSH_45DEG SW_Push_45deg | Kailh-PG1353-Hotswap-2U | SW28 |
| 2 | SW_PUSH_45DEG SW_Push_45deg | Kailh-PG1353-Hotswap-1.75U | SW43, SW67 |
| 2 | SW_PUSH_45DEG SW_Push_45deg | Kailh-PG1353-Hotswap-2.25U | SW55, SW56 |
| 3 | SW_PUSH_45DEG SW_Push_45deg | Kailh-PG1353-Hotswap-1.25U | SW69, SW70, SW71 |
| 1 | SW_PUSH_45DEG SW_Push_45deg | Kailh-PG1353-Hotswap-6.25U | SW72 |
| 2 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW93, SW94 |
| 1 | SW_SPDT | MSK-12C02 | SW95 |
| 78 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +70 |
| 1 | 10UF 10uF | C_0603_1608Metric | C1 |
| 3 | 0.1UF 0.1uF | C_0603_1608Metric | C2, C5, C6 |
| 7 | 10K | R_0603_1608Metric | R1, R6, R7, R8, R9, R10, R11 |
| 4 | 4.7K | R_0603_1608Metric | R2, R3, R4, R5 |
FancyBoard design files
The KiCad project lives in the darshg321/FancyBoard repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/FancyBoard.kicad_pcb
- Schematicpcb/FancyBoard.kicad_sch
- BOMFancyBoard BOM.csv
FancyBoard: common questions
How big is the FancyBoard PCB?
The FancyBoard measures 338.3 × 116.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FancyBoard?
179 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FancyBoard design files?
From the darshg321/FancyBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FancyBoard design in my own project?
The repository has no license, so all rights stay with darshg321. Use it as a reference, and ask the author before reusing the design.