67 open source boards using the MCP23017_SO
Real designs built with the MCP23017_SO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3kAVR/Arduino
Ursa minor keyboard
markstory
298.8 × 122.1 mm134 parts2LCC-BY-NC-4.023I2c-32io
rdoetjes
99 × 48 mm75 parts2LNo license17ESP32
Obsidian-ESP32
singleboardsolutions
65 × 56 mm51 parts2LCERN-OHL-1.216RP2040/RP2350
ElementWing
jamiejcole
321.5 × 233.4 mm188 parts2LNo license11ESP8266
Bewaesserung
SmartHome-yourself
96.5 × 76.2 mm57 parts2LGPL-2.06ESP32
Remora
alexthomazo
66 × 86 mm105 parts2LNo license5ESP8266
Domonode2
NdK73
95 × 139.6 mm103 parts2LMIT5PiHPSDR Controller
F6ITU
256 × 139 mm84 parts2LNo license5Raspberry Pi
OpenA3XX MCDU
OpenA3XX
148 × 225 mm152 parts2LGPL-3.04Raspberry Pi
PiHPSDR-Controller-V.5 inch
LA2NI
220 × 115 mm127 parts2LNo license4Raspberry Pi
Gameboy dmg
alxhoff
82.5 × 87.5 mm52 parts2LGPL-3.04Polykit x controlboard
polykit
200 × 160 mm68 parts2LCC-BY-NC-4.03RP2040/RP2350
Krunchboard
krunchiekrunch
427.6 × 139.1 mm200 parts2LCustom license2ESP32
ILI9341 ESP32
theBrutzler
129.1 × 81 mm161 parts2LNo license2ESP32
PCB Watersysteem
Vertical-Farming-IB3
89.3 × 100 mm88 parts2LNo license2Pyblockplc topseite
pyplc
100.3 × 71.1 mm73 parts2LNo license2- schematic only · 110 partsRaspberry Pi
Smart chess
promaaa
110 partsMIT2 T41-RF-board-V012
K0RGI
100 × 100 mm225 parts4LGPL-3.01ESP32
LCCTurnoutController
vsi5004
116 × 74.5 mm170 parts2LNo license1K PA Protec
F6ITU
102.5 × 75 mm83 parts2LNo license1AVR/Arduino
Z80Card
galjonsfigur
85.6 × 54 mm77 parts2LGPL-3.01ESP32
Long-Range-Communication device-LoRa CO-
Rayudumalluru
79.6 × 124.3 mm35 parts2LCustom license1ESP8266
Smartgate software
georf
151 × 77.4 mm34 parts2LNo license1ESP32
Portfolio
megmem044
191.8 × 123 mm252 parts4LNo license0Latype
kartikrajchauhan
464.5 × 129.1 mm246 parts2LNo license0Kryptek
cschethana03-hash
464.5 × 129.1 mm246 parts2LNo license0PexTypo
utkarshminblr
464.5 × 129.1 mm246 parts2LNo license0Equinox-V1
ishantmahatopro
464.5 × 129.1 mm246 parts2LNo license0ESP32
ZoneTherm
Max-Brants
234.5 × 81 mm231 parts4LMIT0CutieBoard
CHAPARII
338.3 × 116.8 mm179 parts2LNo license0FancyBoard
darshg321
338.3 × 116.8 mm179 parts2LNo license0RP2040/RP2350
X1-palmrest to keyboard
wozniak-works
263.9 × 429.3 mm177 parts2LNo license0PIC
GPSDO
dewayne57
203.2 × 152.4 mm157 parts2LApache-2.00SplitCodeBoard
code2344
318.3 × 177 mm149 parts2LCERN-OHL-S-2.00Nordic nRF
Rabbitboard
information-fiend
310.5 × 111 mm136 parts2LNo license0
How designs wire the MCP23017_SO
Read from the KiCad layouts of 58 open source designs, one per repository: what each pin of the MCP23017_SO connects to, and the resistors, capacitors and other passives placed on it.
- The INTB pin is left unconnected on 44 of 57 designs (a signal on 13).
- The SCK pin has a pull-up to 3.3V on 36 of 57 designs, most often 4.7 kΩ (then 10 kΩ).
- The SDA pin has a pull-up to 3.3V on 36 of 57 designs, most often 4.7 kΩ (then 10 kΩ).
- The INTA pin is left unconnected on 43 of 57 designs (a signal on 14).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 9 | Connected to: 3.3V 88% | — |
| VSSpin 10 | Connected to: GND 96% | — |
| NCpin 11, 14 | Connected to: Not connected 100% | — |
| SCKpin 12 | Connected to: A connector 53%, the microcontroller 40%, MCP23017_SO 21% |
|
| SDApin 13 | Connected to: A connector 53%, the microcontroller 40%, MCP23017_SO 21% |
|
| A0pin 15 | Connected to: GND 63% · a signal 32% | — |
| A1pin 16 | Connected to: GND 63% · a signal 32% | — |
| A2pin 17 | Connected to: GND 67% · a signal 28% | — |
| RESETpin 18 | Connected to: Signal 54% · 3.3V 39% |
|
| INTBpin 19 | Connected to: Not connected 77% · a signal 23% | — |
| INTApin 20 | Connected to: Not connected 75% · a signal 25% | — |
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ferris by pierrechevalier83, Poly UA controller 5enc 5sw by PhysicsDptAngers, DonConPad by ravinrabbid and Korris by yanghu.
The MCP23017_SO in open source designs
The gallery holds 67 open source boards using the MCP23017_SO from 59 GitHub repositories; a typical one measures about 113.1 × 100 mm and carries around 96 components.
88% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Ferris by pierrechevalier83.
Parts used alongside the MCP23017_SO
Microcontrollers on boards using the MCP23017_SO
What boards using the MCP23017_SO are built for
MCP23017_SO: common questions
Where can I find a MCP23017_SO reference design?
Each of the 67 boards on this page is a real design using the MCP23017_SO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP23017_SO INTB pin connected?
The INTB pin is left unconnected on 44 of 57 designs (a signal on 13). Counted from the KiCad layouts of 58 open source designs using the MCP23017_SO.
What pull-up resistor is used on the MCP23017_SO SCK pin?
The SCK pin has a pull-up to 3.3V on 36 of 57 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 58 open source designs using the MCP23017_SO.
What pull-up resistor is used on the MCP23017_SO SDA pin?
The SDA pin has a pull-up to 3.3V on 36 of 57 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 58 open source designs using the MCP23017_SO.
What parts are used alongside the MCP23017_SO?
The USBLC6-2SC6, AMS1117-3.3, 74HC02, 74HC237 and AD7991YRJZ appear in the most repositories here.
Which microcontrollers do boards using the MCP23017_SO use?
Most are built on ESP32 (10), RP2040/RP2350 (9), Raspberry Pi (5) and ESP8266 (5).
How big is a typical board using the MCP23017_SO?
The median is 113.1 × 100 mm, and 88% are two-layer designs.
What is the most popular open source board using the MCP23017_SO?
By GitHub stars, Ferris by pierrechevalier83, with 1,271 stars.
Can I simulate one of these boards using the MCP23017_SO before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.