Axes controller board
DEDALUS-5x·axes-controller-board
About the Axes controller board
Axes controller board is an open source STM32 PCB design by DEDALUS-5x, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 203.1 × 107.7 mm, with 103 components from 28 distinct parts.
Its main chip is the STM32H723ZGT6, from the STM32 family. Other key parts include the TPS5450QDDARQ1, LM1117MP-3.3/TR and UA9637ACD. By type, the board carries 53 resistors, 33 capacitors, 6 ICs, 5 diodes, 2 connectors and 1 crystal.
It belongs with the robotics & motion designs in this gallery.
From the project
Motherboard schematic design dedicated to motors control
KiCad design files of the Axes Controller Board, the STM32H723-based motion controller of the DEDALUS five-axis printer. The board drives three brushed DC servo axes through external H-bridges and six stepper drivers in StepStick sockets, reads differential incremental and SPI absolute encoders, and carries a Raspberry Pi 5 as a daughterboard.
The files in outputs/ were exported from the KiCad project with kicad-cli (KiCad 9). For JLCPCB assembly, the Fabrication Toolkit plug-in generates the BOM and placement files in the required format, using the LCSC codes and rotation offsets stored in…
Main components on the Axes controller board
Axes controller board bill of materials (BOM)
103 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5450QDDARQ1 | SOIC127P600X170-9N | IC1 |
| 1 | STM32H723ZGT6 | QFP50P2200X2200X160-144N | IC5 |
| 1 | LM1117MP-3.3/TR LM1117MP-3.3 | SOT-223-3_TabPin2 | U1 |
| 3 | UA9637ACD UA9637A | SOIC-8_3.9x4.9mm_P1.27mm | U3, U5, U7 |
| 1 | 16MHZ 16MHz | Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_ST_STDC14 | SAMTEC_FTSH-107-01-L-DV-K-TR | J1 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | 750MA 750mA | Fuse_0603_1608Metric | F1 |
| 1 | BOOT0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 2 | TLMS1000-GS15 LED_Small | D_0603_1608Metric | D1, D2 |
| 1 | B540C | D_SMC_Handsoldering | D3 |
| 2 | C2286 LED_Small | LED_0603_1608Metric | D5, D6 |
| 1 | 15U 15u | L_12x12mm_H6mm | L2 |
| 3 | 10U 10u | C_0603_1608Metric | C1, C2, C3 |
| 2 | 15PF 15pF | C_0603_1608Metric | C4, C5 |
| 9 | 100NF 100nF | C_0603_1608Metric | C6, C32, C33, C34, C39, C40, C41, C46 +1 |
| 2 | 4.7U 4.7u | C_0805_2012Metric | C10, C11 |
| 9 | 10N 10n | C_0603_1608Metric | C12, C13, C15, C30, C31, C37, C38, C44 +1 |
| 2 | 2.2U 2.2u | C_0805_2012Metric | C25, C26 |
| 6 | 220P 220p | C_0603_1608Metric | C35, C36, C42, C43, C49, C50 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2k | R_0603_1608Metric | R1 |
| 5 | 1k | R_0603_1608Metric | R2, R10, R11, R41, R42 |
| 25 | 33R | R_0603_1608Metric | R3, R4, R5, R6, R7, R19, R20, R21 +17 |
| 3 | 10K 10k | R_0603_1608Metric | R8, R33, R34 |
| 1 | 3.16K 3.16k | R_0603_1608Metric | R9 |
| 6 | 120R | R_0603_1608Metric | R13, R14, R35, R36, R49, R50 |
| 6 | 1K8 1k8 | R_0603_1608Metric | R15, R16, R37, R38, R51, R52 |
| 6 | 3K3 3k3 | R_0603_1608Metric | R17, R18, R39, R40, R53, R54 |
Axes controller board design files
The KiCad project lives in the DEDALUS-5x/axes-controller-board repository on GitHub; these links point at the commit this page was built from.
Axes controller board: common questions
What microcontroller does the Axes controller board use?
The Axes controller board is built around the STM32H723ZGT6, from the STM32 family.
How big is the Axes controller board?
The Axes controller board measures 203.1 × 107.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Axes controller board?
103 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Axes controller board design files?
From the DEDALUS-5x/axes-controller-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Axes controller board design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which DEDALUS-5x chose for the repository.
Can I test firmware for the Axes controller board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k