Prototipo
DeniseViltes·Tesis·hardware/PCB/prototipo.kicad_pcb
About the Prototipo PCB
Prototipo is an open source PCB design by DeniseViltes, published on GitHub. It is a 2-layer board measuring 188.4 × 185 mm, with 185 components from 27 distinct parts.
By type, the board carries 45 resistors, 24 transistors, 9 fuses, 9 switches, 9 LEDs and 9 diodes.
From the project
Repositorio personal del TIF
Trabajo Profesional de Ingeniería Electrónica Facultad de Ingeniería – Universidad de Buenos Aires (FIUBA) Año 2026
Integrantes - Sebastián Ezequiel García - Denise Oriana Viltes
Tutora: Dra. Cecilia G. Galarza Cotutor: Ing. Juan Zuloaga
Este proyecto presenta el diseño, simulación e implementación de una plataforma experimental para evaluar estrategias de ecualización activa en baterías de litio.
Prototipo bill of materials (BOM)
185 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | DIP-14_W7.62mm_LongPads | A1 |
| 15 | MMBT2222A | SOT-23-3 | Q1_1, Q2_1, Q3_1, Q11_1, Q11_3, Q12_1, Q12_3, Q21_1 +7 |
| 3 | MMBFJ201 | SOT-23-3 | Q1_2, Q2_2, Q3_2 |
| 6 | MMBT2907A | SOT-23-3 | Q11_2, Q12_2, Q21_2, Q22_2, Q31_2, Q32_2 |
| 1 | Conn_02x12_Odd_Even | PinHeader_2x12_P2.54mm_Vertical | J1 |
| 5 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | Celdas_bus1, J_B1, J_B2, J_B3, J_B4 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | Celdas_inf1, Celdas_sup1 |
| 9 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1, F2, F3, F11, F12, F21, F22, F31 +1 |
| 1 | Conn_01x02_Socket | TerminalBlock_bornier-2_P5.08mm | OUT1 |
| 9 | MMBT2222A | SOT-23-3 | QLED1, QLED2, QLED3, QLED11, QLED21, QLED22, QLED31, QLED32 +1 |
| 9 | 20k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RLED1_1, RLED2_1, RLED3_1, RLED11_1, RLED12_1, RLED21_1, RLED22_1, RLED31_1 +1 |
| 9 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RLED1_2, RLED2_2, RLED3_2, RLED11_2, RLED12_2, RLED21_2, RLED22_2, RLED31_2 +1 |
| 6 | 1m | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rout11, Rout12, Rout21, Rout22, Rout31, Rout32 |
| 3 | FDMS6681Z | FDMS6681Z | S1, S2, S3 |
| 6 | IRLB8721 | TO-220-3_Vertical | S11, S12, S21, S22, S31, S32 |
| 2 | IRLB8721 | TO-220-3_Vertical | Sgnd11, Sgnd21 |
| 29 | TestPoint | TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TPB11, TPB12, TPB21, TPB22, TPB31, TPB32, TPC11, TPC12 +21 |
| 6 | 3.3 | BatteryHolder_MPD_BK-18650-PC2 | VCELL11, VCELL12, VCELL21, VCELL22, VCELL31, VCELL32 |
| 9 | LED | LED_D5.0mm | DLED1, DLED2, DLED3, DLED11, DLED12, DLED21, DLED22, DLED31 +1 |
| 9 | 1N4736A | D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D11, D12, D21, D22, D31 +1 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 570K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1_7, R2_7, R3_7 |
| 3 | 300K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1_8, R2_8, R3_8 |
| 15 | 20k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1_9, R2_9, R3_9, R11_1, R11_6, R12_1, R12_6, R21_1 +7 |
| 6 | 10Meg | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11_2, R12_2, R21_2, R22_2, R31_2, R32_2 |
| 6 | 1Meg | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11_3, R12_3, R21_3, R22_3, R31_3, R32_3 |
| 6 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11_4, R12_4, R21_4, R22_4, R31_4, R32_4 |
| 6 | 33k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11_5, R12_5, R21_5, R22_5, R31_5, R32_5 |
Prototipo design files
The KiCad project lives in the DeniseViltes/Tesis repository on GitHub; these links point at the commit this page was built from.
Prototipo: common questions
How big is the Prototipo PCB?
The Prototipo measures 188.4 × 185 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Prototipo?
185 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Prototipo design files?
From the DeniseViltes/Tesis repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Prototipo design in my own project?
The repository has no license, so all rights stay with DeniseViltes. Use it as a reference, and ask the author before reusing the design.