Switch celda
DeniseViltes·Tesis·hardware/Circuito Final/Switch celda - Torre/Switch celda.kicad_pcb
About the Switch celda PCB
Switch celda is an open source PCB design by DeniseViltes, published on GitHub. It is a 2-layer board measuring 98.6 × 38 mm, with 29 components from 22 distinct parts.
By type, the board carries 7 resistors, 3 transistors, 3 test points, 2 switches, 1 fuse and 1 LED.
From the project
Repositorio personal del TIF
Trabajo Profesional de Ingeniería Electrónica Facultad de Ingeniería – Universidad de Buenos Aires (FIUBA) Año 2026
Integrantes - Sebastián Ezequiel García - Denise Oriana Viltes
Tutora: Dra. Cecilia G. Galarza Cotutor: Ing. Juan Zuloaga
Este proyecto presenta el diseño, simulación e implementación de una plataforma experimental para evaluar estrategias de ecualización activa en baterías de litio.
Switch celda bill of materials (BOM)
29 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MMBT2222A | SOT-23_Handsoldering | Q1, Q3 |
| 1 | MMBT2907A | SOT-23_Handsoldering | Q2 |
| 1 | Portapilas 18650 | BatteryHolder_MPD_BK-18650-PC2 | Celda1 |
| 1 | ~ | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J_In_Out_1 |
| 2 | Conn_01x07_Socket | PinSocket_1x07_P2.54mm_Vertical | J_In_Vcell_1, J_In_cell_neg_1 |
| 2 | Conn_02x07_Odd_Even | PinHeader_2x07_P2.54mm_Vertical | Jumper_Vcell_1, Jumper_cell_neg_1 |
| 1 | MMBT2222A | SOT-23_Handsoldering | QLED1 |
| 1 | AO3401 | SOT-23_Handsoldering | Qinv1 |
| 1 | AO3400 | SOT-23_Handsoldering | Qinv2 |
| 1 | 20k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RLED1 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RLED2 |
| 1 | 0 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rvia1 |
| 2 | IRLB8721 | TO-220-3_Vertical | S1, S2 |
| 1 | TP_base | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP1 |
| 1 | TP_gate | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP2 |
| 1 | TP_inv | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP3 |
| 1 | LED | LED_D5.0mm | DLED1 |
| 2 | 20k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R6 |
| 3 | TBD | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 33k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
Switch celda design files
The KiCad project lives in the DeniseViltes/Tesis repository on GitHub; these links point at the commit this page was built from.
Switch celda: common questions
How big is the Switch celda PCB?
The Switch celda measures 98.6 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Switch celda?
29 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Switch celda design files?
From the DeniseViltes/Tesis repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Switch celda design in my own project?
The repository has no license, so all rights stay with DeniseViltes. Use it as a reference, and ask the author before reusing the design.