FlySensei Stack RPi
About the FlySensei Stack RPi PCB
FlySensei Stack RPi is an open source PCB design by denjos007, published on GitHub. It is a 4-layer board measuring 90 × 65 mm, with 4 components from 4 distinct parts.
From the project
PCB Design for the Stacked design for Blimp Controller
Each stack contains 2x 20 pin connector with male pins on the top and the female pins on the bottom
- Create a new PCB project in KiCAD - Copy the schematic file and the PCB file to the project - Rename the PCB file to the same name as the project - Add the schematic of the connector to the main sheet as a hierarchical sheet
FlySensei Stack RPi bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x20_Odd_Even_Male | PinHeader_2x20_P1.27mm_Vertical_SMD | J1 |
| 1 | USB4105-GF-A Conn_02x20_Odd_Even_Female GCT | PinHeader_2x20_P1.27mm_Vertical_SMD | J2 |
| 1 | FTSH-120-01-F-DV Conn_02x20_Odd_Even_Male Samtec Inc. | PinHeader_2x20_P1.27mm_Vertical_SMD | J3 |
| 1 | CLP-120-02-L-D Conn_02x20_Odd_Even_Female Samtec Inc. | PinHeader_2x20_P1.27mm_Vertical_SMD | J4 |
FlySensei Stack RPi design files
The KiCad project lives in the denjos007/FlySensei_Stack_ECAD repository on GitHub; these links point at the commit this page was built from.
FlySensei Stack RPi: common questions
How big is the FlySensei Stack RPi PCB?
The FlySensei Stack RPi measures 90 × 65 mm, has 4 copper layers and is 1.18 mm thick.
How many components are on the FlySensei Stack RPi?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FlySensei Stack RPi design files?
From the denjos007/FlySensei_Stack_ECAD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FlySensei Stack RPi design in my own project?
The repository has no license, so all rights stay with denjos007. Use it as a reference, and ask the author before reusing the design.
