Memdump
Derisis13·memdump
About the Memdump PCB
Memdump is an open source STM32 PCB design by Derisis13, published on GitHub. It is a 2-layer board measuring 56.1 × 86.1 mm, with 78 components from 24 distinct parts.
Its main chip is the STM32F103C8, from the STM32 family. Other key parts include the AMS1117-3.3, 74HC595 and DIP28/32. By type, the board carries 43 resistors, 17 capacitors, 6 ICs, 4 connectors, 4 diodes and 2 switches.
From the project
One device to dump them all
Main components on the Memdump
Memdump bill of materials (BOM)
78 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103C8 | LQFP-48_7x7mm_P0.5mm | U2 |
| 3 | 74HC595 | SOP-16_3.9x9.9mm_P1.27mm | U3, U4, U5 |
| 1 | DIP28/32 | DIP_Socket-32_W11.9_W12.7_W15.24_W17.78_W18.5_3M_232-1285-00-0602J | U6 |
| 1 | SI4800 | SO-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | 12M | Crystal_HC18-U_Vertical | Y1 |
| 1 | USB_C_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | BOOT0 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LEVEL | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SPI I2C | DIP_Socket-16_W4.3_W5.08_W7.62_W10.16_W10.9_3M_216-3340-00-0602J | S1 |
| 1 | RESET | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | VBUS OK | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D4 |
| 1 | SS34 | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 12 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C5, C6, C7, C9, C12, C13 +4 |
| 2 | 22p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 1u | CP_Elec_4x4.5 | C8, C10 |
| 1 | 22u | CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C11 |
| 2 | 33k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 5k1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1k5 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 4 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R9, R10, R11 |
| 35 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R12, R13, R14, R15, R16 +27 |
Memdump design files
The KiCad project lives in the Derisis13/memdump repository on GitHub; these links point at the commit this page was built from.
- Layoutmemdump_hw.kicad_pcb
- Schematicmemdump_hw.kicad_sch
Memdump: common questions
What microcontroller does the Memdump use?
The Memdump is built around the STM32F103C8, from the STM32 family.
How big is the Memdump PCB?
The Memdump measures 56.1 × 86.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Memdump?
78 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Memdump design files?
From the Derisis13/memdump repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Memdump design in my own project?
The repository has no license, so all rights stay with Derisis13. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Memdump without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k