452 open source boards using the 74HC595

Real designs built with the 74HC595, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

452 boardsClear filters|Most starred

How designs wire the 74HC595

Read from the KiCad layouts of 344 open source designs, one per repository: what each pin of the 74HC595 connects to, and the resistors, capacitors and other passives placed on it.

  • The SRCLR pin is tied to 5V on 225 of 341 designs (not connected on 12, GND on 4, a signal on 100).
  • The VCC pin has a decoupling capacitor on 146 of 340 designs, most often 100 nF (then 1 µF).
QBpin 1Connected to: Signal 94%
  • Series resistor on 35% · 220 Ω (20), 330 Ω (17), 1 kΩ (15)
QCpin 2Connected to: Signal 95%
  • Series resistor on 35% · 220 Ω (21), 330 Ω (17), 1 kΩ (15)
QDpin 3Connected to: Signal 96%
  • Series resistor on 35% · 220 Ω (22), 330 Ω (16), 1 kΩ (15)
QEpin 4Connected to: Signal 94%
  • Series resistor on 33% · 220 Ω (18), 330 Ω (17), 1 kΩ (13)
QFpin 5Connected to: Signal 91%
  • Series resistor on 32% · 330 Ω (18), 220 Ω (18), 1 kΩ (12)
QGpin 6Connected to: Signal 91%
  • Series resistor on 33% · 330 Ω (20), 220 Ω (17), 1 kΩ (12)
QHpin 7Connected to: Signal 87%
  • Series resistor on 32% · 330 Ω (22), 220 Ω (16), 1 kΩ (11)
GNDpin 8Connected to: GND 93%
SRCLRpin 10Connected to: 5V 66% · a signal 29%
QApin 15Connected to: Signal 90%
  • Series resistor on 35% · 220 Ω (20), 330 Ω (17), 1 kΩ (14)
VCCpin 16Connected to: 5V 93%
  • Decoupling capacitor on 43% · 100 nF (132), 1 µF (6), 10 nF (3)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ChainlinkDriver by scottbez1, Board by dennisss, Gamepad by vsfteam and Mongus48 by ChrisChrisLoLo.

The 74HC595 in open source designs

The gallery holds 452 open source boards using the 74HC595 from 360 GitHub repositories; a typical one measures about 100 × 84.3 mm and carries around 64 components.

84% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.

The most starred is ChainlinkDriver by scottbez1.

74HC595: common questions

Where can I find a 74HC595 reference design?

Each of the 452 boards on this page is a real design using the 74HC595. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HC595 SRCLR pin connected?

The SRCLR pin is tied to 5V on 225 of 341 designs (not connected on 12, GND on 4, a signal on 100). Counted from the KiCad layouts of 344 open source designs using the 74HC595.

What decoupling capacitors do designs use on the 74HC595 VCC pin?

The VCC pin has a decoupling capacitor on 146 of 340 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 344 open source designs using the 74HC595.

What parts are used alongside the 74HC595?

The 74HC165, AMS1117-3.3, ULN2803A, L7805 and 74HC00 appear in the most repositories here.

Which microcontrollers do boards using the 74HC595 use?

Most are built on AVR/Arduino (93), ESP32 (44), RP2040/RP2350 (36) and STM32 (31).

How big is a typical board using the 74HC595?

The median is 100 × 84.3 mm, and 84% are two-layer designs.

What is the most popular open source board using the 74HC595?

By GitHub stars, ChainlinkDriver by scottbez1, with 4,156 stars.

Can I simulate one of these boards using the 74HC595 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part