Asteroids adapter
dfnr2·asteroids-adapter
About the Asteroids adapter PCB
Asteroids adapter is an open source PCB design by dfnr2, published on GitHub. It is a 2-layer board measuring 85.2 × 107.7 mm, with 23 components from 11 distinct parts.
Other key parts include the TL074. By type, the board carries 9 resistors, 8 capacitors, 4 connectors and 1 IC.
From the project
Adapter for Asteroid PCB in Asteroide Deluxe Cabinet (or vice versa)
Main components on the Asteroids adapter
Asteroids adapter bill of materials (BOM)
23 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL074 Texas Instruments | DIP-14_W7.62mm | U1 |
| 1 | Asteroids PCB connector EDAC | EDAC 44-pin edge 0.156 universal | J1 |
| 1 | Asteroids harness connector | edge 44-pin 0.156 inch | J2 |
| 1 | Audio Gain 3M | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | FLIP Y 3M | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | CUI PDM1-S5-D15-S CUI | CONV_PDM1-S5-D15-S | VR1 |
| 4 | Kemet 10 uF 25V MLCC TH Kemet | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C5, C8 |
| 4 | Kemet MLCC 100 pF 5% 25V TH Kemet | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4, C6, C7 |
| 2 | Yageo 1K ohm 1% thin film TH Yageo | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R8 |
| 6 | Yageo 10K ohm 1% thin film TH Yageo | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R6, R7 |
| 1 | Yageo 1Mohm 1% thin film TH_1 Yageo | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
Asteroids adapter design files
The KiCad project lives in the dfnr2/asteroids-adapter repository on GitHub; these links point at the commit this page was built from.
- Layoutasteroids-adapter.kicad_pcb
- Schematicasteroids-adapter.kicad_sch
Asteroids adapter: common questions
How big is the Asteroids adapter PCB?
The Asteroids adapter measures 85.2 × 107.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Asteroids adapter?
23 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Asteroids adapter design files?
From the dfnr2/asteroids-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Asteroids adapter design in my own project?
The repository has no license, so all rights stay with dfnr2. Use it as a reference, and ask the author before reusing the design.