Custom keyboard
dhillon-m·custom-keyboard·hardware/bhoo_75/pcb/PCB.kicad_pcb
About the Custom keyboard PCB
Custom keyboard is an open source PCB design by dhillon-m, published on GitHub under the MIT license. It is a 2-layer board measuring 306.4 × 122.2 mm, with 169 components from 9 distinct parts.
Other key parts include the Nice_Nano_V2. By type, the board carries 84 switches, 84 diodes and 1 IC.
It belongs with the keyboards, iot & wireless and displays & leds designs in this gallery.
From the project
ZMK firmware for the BHOO-75 wireless keyboard and BHOO-20 numpad with OLED (nice!nano v2, split)
A custom wireless keyboard setup with two parts. This repo has the ZMK firmware, the KiCad PCB and the case CAD.
Both run on a nice!nano v2 (nRF52840). The BHOO-75 pairs with the host over Bluetooth or USB. The BHOO-20 connects to the BHOO-75 as a ZMK split peripheral, so both boards share one keymap and appear to the computer as a single keyboard.
- Two boards, one keymap. Positions 0–18 are the numpad and 19–102 are the main keyboard, all defined in bhoo75.keymap. - UK layout via zmk-locales (keysengb.h). - OLED battery screen (WIP) on the BHOO-20. See below. - Bluetooth layer for…

Main components on the Custom keyboard
Custom keyboard bill of materials (BOM)
169 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Nice_Nano_V2 | Nice_Nano_V2 | U1 |
| 74 | Keyswitch | MX-Solderable-1U | S1, S2, S3, S4, S5, S6, S7, S8 +66 |
| 1 | Keyswitch | MX-Solderable-2U | S29 |
| 1 | Keyswitch | MX-Solderable-1.5U | S31 |
| 2 | Keyswitch | MX-Solderable-1.75U | S45, S72 |
| 1 | Keyswitch | MX-Solderable-ISO | S58 |
| 4 | Keyswitch | MX-Solderable-1.25U | S60, S75, S76, S77 |
| 1 | Keyswitch | MX-Solderable-6.25U | S78 |
| 84 | Diode | Diode_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +76 |
Custom keyboard design files
The KiCad project lives in the dhillon-m/custom-keyboard repository on GitHub; these links point at the commit this page was built from.
Custom keyboard: common questions
How big is the Custom keyboard PCB?
The Custom keyboard measures 306.4 × 122.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Custom keyboard?
169 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Custom keyboard design files?
From the dhillon-m/custom-keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Custom keyboard design in my own project?
Yes, under the terms of its MIT license, which dhillon-m chose for the repository.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k