MacroKeyboard2RotaryEncoders Mech with profiles
About the MacroKeyboard2RotaryEncoders Mech with profiles PCB
MacroKeyboard2RotaryEncoders Mech with profiles is an open source PCB design by dipenarathod, published on GitHub. It is a 2-layer board measuring 110 × 88 mm, with 27 components from 10 distinct parts.
By type, the board carries 19 switches, 6 resistors and 1 LED.
It belongs with the keyboards designs in this gallery.
From the project
Pending and complete macro keyboards
MacroKeyboard2RotaryEncoders Mech with profiles bill of materials (BOM)
27 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPARKFUN_PRO_MICRO | SPARKFUN_PRO_MICRO | B1 |
| 1 | SW | SW_Cherry_MX_1.00u_Plate | SW1 |
| 13 | SW_Push | SW_Cherry_MX_1.00u_Plate | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +5 |
| 1 | RE1 | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW13 |
| 1 | RE2 | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW16 |
| 1 | RESET | SW_PUSH_6mm_H4.3mm | SW17 |
| 2 | SW_Push | SW_PUSH_6mm_H4.3mm | SW18, SW19 |
| 1 | SSD1306 | 128x64OLED | Brd1 |
| 4 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
| 2 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5, R6 |
MacroKeyboard2RotaryEncoders Mech with profiles design files
The KiCad project lives in the dipenarathod/Macro-Keyboards repository on GitHub; these links point at the commit this page was built from.
- LayoutMacroKeyboard2RotaryEncoders_Mech_with_profiles/MacroKeyboard2RotaryEncoders_Mech_with_profiles/MacroKeyboard2RotaryEncoders_Mech_with_profiles.kicad_pcb
- SchematicMacroKeyboard2RotaryEncoders_Mech_with_profiles/MacroKeyboard2RotaryEncoders_Mech_with_profiles/MacroKeyboard2RotaryEncoders_Mech_with_profiles.kicad_sch
MacroKeyboard2RotaryEncoders Mech with profiles: common questions
How big is the MacroKeyboard2RotaryEncoders Mech with profiles PCB?
The MacroKeyboard2RotaryEncoders Mech with profiles measures 110 × 88 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MacroKeyboard2RotaryEncoders Mech with profiles?
27 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the MacroKeyboard2RotaryEncoders Mech with profiles design files?
From the dipenarathod/Macro-Keyboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MacroKeyboard2RotaryEncoders Mech with profiles design in my own project?
The repository has no license, so all rights stay with dipenarathod. Use it as a reference, and ask the author before reusing the design.
More boards in Macro-Keyboards
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k