Lily58
About the Lily58 PCB
Lily58 is an open source PCB design by kata0510, published on GitHub under the MIT license. It is a 2-layer board measuring 142.5 × 106.3 mm, with 83 components from 14 distinct parts.
Other key parts include the ProMicro. By type, the board carries 29 switches, 29 diodes, 8 jumpers, 5 connectors, 2 resistors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
6×4+4keys column-staggered split keyboard.
- Lily58 Pro - PCB Data - BuildGuide JP - BuildGuide EN - BuildGuide IT - Shop(Yushakobo) - Lily58 Lite Rev2 - BuildGuide(YouTube) - BuildInfo - Shop(BOOTH) - Shop(Yushakobo) - Lily58(Old) - PCB Data - BuildGuide - Lily58 Lite Rev1(Old) - PCB Data - BuildGuide
Main components on the Lily58
Lily58 bill of materials (BOM)
83 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro_rev2 | U1 |
| 1 | LED | StripLED | J1 |
| 1 | 4PIN | MJ-4PP-9 | J2 |
| 2 | i2c_pin | 1pin_conn | P1, P2 |
| 1 | ICSP | ICSP | P3 |
| 8 | — | Jumper | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 1 | SW_RST | TACT_SWITCH_TVBP06 | RSW1 |
| 28 | SW_PUSH | MX_PG1350-Under_FLIP_HOLES_18mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +20 |
| 1 | SW_PUSH | MX_PG1350-Under_FLIP_HOLES_27mm | SW26 |
| 2 | HOLE | M2_HOLE_PCB | TH1, TH2 |
| 5 | HOLE | HOLE_M2_TH | TH3, TH4, TH5, TH6, TH7 |
| 1 | jumper | jumper_data | W1 |
| 29 | D | Diode_TH_SOD123 | D1, D2, D3, D4, D5, D6, D7, D8 +21 |
| 2 | R | RESISTOR_mini | R1, R2 |
Lily58 design files
The KiCad project lives in the kata0510/Lily58 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/Lily58.kicad_pcb
Lily58: common questions
How big is the Lily58 PCB?
The Lily58 measures 142.5 × 106.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lily58?
83 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lily58 design files?
From the kata0510/Lily58 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Lily58 design in my own project?
Yes, under the terms of its MIT license, which kata0510 chose for the repository.
More boards in Lily58
RP2040/RP2350Pro V2
290.1 × 130 mm270 parts2LMIT2.3k
RP2040/RP2350Lily58 Lite Rev3
218.5 × 159.5 mm116 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Lite Rev3 TOP Case
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k
Half plate
tzarc
95.3 × 76.2 mm24 parts2LCERN-OHL-S-2.0988
Board-DjinnPlate
191 × 152.9 mm4 parts2LCERN-OHL-S-2.0988
Chocofi
pashutk
111.3 × 90 mm50 parts2LCERN-OHL-P-2.0781
Chocofi topplate
111.4 × 90 mm18 parts2LCERN-OHL-P-2.0781