Canpmod

disdi·canpmod·kicad/canpmod.kicad_pcb

Canpmod PCB layout, top view — open source board by disdi

About the Canpmod PCB

Canpmod is an open source PCB design by disdi, published on GitHub under the MIT license. It is a 2-layer board measuring 37.6 × 18.5 mm, with 12 components from 9 distinct parts.

Other key parts include the SN65HVD230. By type, the board carries 5 resistors, 3 capacitors, 2 connectors, 1 IC and 1 jumper.

From the project

CAN PMOD is a 3.3 V SN65HVD230 CAN transceiver module, based on the Waveshare SN65HVD230 CAN board. The host must provide the CAN protocol controller.

CAN PMOD is a 3.3 V SN65HVD230 CAN transceiver module, based on the Waveshare SN65HVD230 CAN board. The host must provide the CAN protocol controller.

The project is KiCad 9.0.8. Open kicad/canpmod.kicad_pro. The two-layer, 1.6 mm board has 12 components and keeps its original outline and component placement.

This revision corrects the PMOD footprint's physical numbering, reroutes the affected nets, adds local connector footprints, and refreshes silkscreen and library symbols. ERC reports 0 errors and 0 warnings. DRC with schematic parity reports 0 violations and 0 unconnected items.

Canpmod, from the project README
From the project README

Main components on the Canpmod

Canpmod bill of materials (BOM)

12 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN65HVD230
U1
1
CONN_01X02
Conn_01x02
J1
1
PMOD
J2
1
JUMPER_2_OPEN
Jumper_2_Open
JP1
1
100NF
100nF
C1
2
560PF
560pF
C2, C3
2
4.7K
R1, R2
2
100
R3, R4
1
120
R5

Canpmod design files

The KiCad project lives in the disdi/canpmod repository on GitHub; these links point at the commit this page was built from.

Canpmod: common questions

How big is the Canpmod PCB?

The Canpmod measures 37.6 × 18.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Canpmod?

12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Canpmod design files?

From the disdi/canpmod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Canpmod design in my own project?

Yes, under the terms of its MIT license, which disdi chose for the repository.