Analog PID Controller

DishanPanchigar·Analog_PID_Controller·PCB Design/Analog_PID_Controller.kicad_pcb

Analog PID Controller PCB layout, top view — open source board by DishanPanchigar

About the Analog PID Controller PCB

Analog PID Controller is an open source PCB design by DishanPanchigar, published on GitHub. It is a 2-layer board measuring 81.8 × 78 mm, with 41 components from 15 distinct parts.

Other key parts include the LM358. By type, the board carries 18 resistors, 10 capacitors, 4 ICs, 4 connectors and 1 inductor.

From the project

An all-hardware Proportional-Integral-Derivative (PID) controller built entirely from op-amps, resistors, and capacitors — no microcontroller, no code. Designed and simulated in Proteus, hand-built on a proto-board, and laid out as a two-layer PCB in KiCad.

An all-hardware Proportional-Integral-Derivative (PID) controller built entirely from op-amps, resistors, and capacitors — no microcontroller, no code. Designed and simulated in Proteus, hand-built on a proto-board, and laid out as a two-layer PCB in KiCad.

Digital PID controllers dominate modern practice, but analog controllers still have a place where continuous-time response, zero sampling delay, and simplicity matter. This project implements the classic PID control law directly in hardware using LM358 op-amps:

Analog PID Controller, from the project README
From the project README

Main components on the Analog PID Controller

Analog PID Controller bill of materials (BOM)

41 components, 15 distinct parts.

QtyPartRefs
4
LM358
U1, U2, U3, U4
3
Screw_Terminal_01x02
J1, J3, J4
1
Conn_01x03_Socket
J2
2
50k
RV1, RV3
2
100k
RV2, RV4
1
FerriteBead
FB1
1
100uF
C1
1
22uF
C2
6
0.1uF
C3, C4, C5, C6, C7, C10
1
4.7uF
C8
1
10uF
C9
13
10k
R1, R2, R3, R7, R8, R9, R10, R11 +5
3
1k
R4, R13, R14
1
1M
R5
1
100k
R6

Analog PID Controller design files

The KiCad project lives in the DishanPanchigar/Analog_PID_Controller repository on GitHub; these links point at the commit this page was built from.

Analog PID Controller: common questions

How big is the Analog PID Controller PCB?

The Analog PID Controller measures 81.8 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Analog PID Controller?

41 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Analog PID Controller design files?

From the DishanPanchigar/Analog_PID_Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Analog PID Controller design in my own project?

The repository has no license, so all rights stay with DishanPanchigar. Use it as a reference, and ask the author before reusing the design.