Skytraq px1125r

dizcza·skytraq_px1125r_kicad

Skytraq px1125r PCB layout, top view — open source board by dizcza

About the Skytraq px1125r PCB

Skytraq px1125r is an open source PCB design by dizcza, published on GitHub. It is a 4-layer board measuring 36 × 36 mm, with 43 components from 19 distinct parts.

Other key parts include the RV-3032, CP2102N-A02-GQFN20R, AMS1117-3.3 and USBLC6-2SC6. By type, the board carries 15 resistors, 13 capacitors, 6 diodes, 4 ICs, 3 connectors and 1 battery holder.

From the project

SkyTraq PX1125 and PX1105 RTK Kicad design

Compatible with flight controllers & Ardupilot. Connects to a flight controller with a typical JST-1.25 GH 6P connector. Connects to a laptop with a USB Type-C. LIS3MDL magnetometer onboard. RV3032 RTC onboard for microsecond time synchronization and AGE finetuning. 4 M3 pads on edges for mounting. The pads are connected to GND.

Skytraq px1125r, from the project README
From the project README

Main components on the Skytraq px1125r

Skytraq px1125r bill of materials (BOM)

43 components, 19 distinct parts.

QtyPartRefs
1
RV-3032
U2
1
CP2102N-A02-GQFN20R
U4
1
AMS1117-3.3
U6
1
USBLC6-2SC6
U7
2
JST_GH_1.25_6P
J1, J3
1
USB_C_Receptacle_USB2.0_16P
J5
1
MS621FE
BT1
1
BLUE
D1
1
RED
D2
1
GREEN
D3
3
D_Schottky
D4, D5, D6
1
FerriteBead
FB2
10
10uF
C1, C3, C4, C5, C6, C7, C11, C13 +2
3
100nF
C10, C12, C15
6
10k
R1, R2, R3, R6, R10, R14
5
1k
R4, R5, R12, R13, R15
1
22k
R16
1
47k
R17
2
5.1k
R20, R21

Skytraq px1125r design files

The KiCad project lives in the dizcza/skytraq_px1125r_kicad repository on GitHub; these links point at the commit this page was built from.

Skytraq px1125r: common questions

How big is the Skytraq px1125r PCB?

The Skytraq px1125r measures 36 × 36 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Skytraq px1125r?

43 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Skytraq px1125r design files?

From the dizcza/skytraq_px1125r_kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Skytraq px1125r design in my own project?

The repository has no license, so all rights stay with dizcza. Use it as a reference, and ask the author before reusing the design.