HardLabs

Pcb

DMProAccelerator·pcb·DMPro17/DMPro17.kicad_pcb

Pcb layout, top view — open source AVR/Arduino board by DMProAccelerator

About the Pcb

Pcb is an open source AVR/Arduino PCB design by DMProAccelerator, published on GitHub. It is a 4-layer board measuring 119.9 × 69 mm, with 59 components from 17 distinct parts.

Its main chip is the ARDUINO_PYNQ_SHIELD, from the AVR/Arduino family. Other key parts include the EFM32GG990F1024. By type, the board carries 17 resistors, 13 diodes, 11 capacitors, 8 jumpers, 4 switches and 2 ICs.

From the project

pcb

Main components on the Pcb

ARDUINO_PYNQ_SHIELDEFM32GG990F1024

Pcb bill of materials (BOM)

59 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ARDUINO_PYNQ_SHIELD
U1
1
EFM32GG990F1024
U2
1
Crystal_GND23
Y1
1
Board_Connector
B1
1
CONN_02X10
J1
4
M08
JP1, JP6, JP7, JP8
2
M06
JP2, JP4
1
M04
JP3
1
M10
JP5
4
SW_PUSHBUTTON
SW2, SW3, SW4, SW5
12
LED
D1, D2, D3, D4, D5, D6, D7, D8 +4
1
LS013B4DN04
D13
1
L
L1
3
10u
C1, C9, C13
5
100n
C4, C5, C6, C7, C8
3
10n
C10, C11, C12
17
R
R1, R2, R3, R4, R5, R6, R7, R8 +9

Pcb design files

The KiCad project lives in the DMProAccelerator/pcb repository on GitHub; these links point at the commit this page was built from.

Pcb: common questions

What microcontroller does the Pcb use?

The Pcb is built around the ARDUINO_PYNQ_SHIELD, from the AVR/Arduino family.

How big is the Pcb?

The Pcb measures 119.9 × 69 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Pcb?

59 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pcb design files?

From the DMProAccelerator/pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Pcb design in my own project?

The repository has no license, so all rights stay with DMProAccelerator. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pcb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards