2.5in-IDE-SSD
dosdude1·2.5-inch-ide-ssd·PCB/2.5in-IDE-SSD.kicad_pcb
About the 2.5in-IDE-SSD PCB
2.5in-IDE-SSD is an open source PCB design by dosdude1, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 65 × 49.8 mm, with 69 components from 14 distinct parts.
By type, the board carries 42 capacitors, 26 resistors and 1 diode.
From the project
A custom-designed IDE SSD for use in any machine that utilizies a 2.5" IDE hard disk.
A custom-designed IDE SSD for use in any machine that utilizies a 2.5" IDE hard disk.
The design is based on the Silicon Motion SM2236 controller, and is compatible with up to four 512Gbit (64GB) BGA152 or BGA132 NANDs.
WARNING: THE SILICON MOTION SM2236 CONTROLLER PINOUT AND IMPLEMENTATION HAVE BEEN REVERSE ENGINEERED FROM OPEN DOCUMENTS AND SALVAGED PCBS, ALL OF WHICH HAVE BEEN LEGALLY OBTAINED. DO NOT EXPECT THIS TO BE CORRECT, CHECK FOR YOURSELF.
2.5in-IDE-SSD bill of materials (BOM)
69 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | 10UF 10uF | C_0805_2012Metric | C1 |
| 25 | 100NF 100nF | C_0402_1005Metric | C2, C4, C6, C8, C10, C11, C14, C15 +17 |
| 4 | 150NF 150nF | C_0402_1005Metric | C3, C5, C7, C9 |
| 4 | 1UF 1uF | C_0603_1608Metric | C12, C13, C41, C42 |
| 8 | 10UF 10uF | C_0603_1608Metric | C25, C26, C27, C28, C37, C38, C39, C40 |
| 8 | 82 | R_0402_1005Metric | R1, R5, R6, R8, R9, R10, R11, R12 |
| 3 | 22 | R_0402_1005Metric | R2, R3, R7 |
| 2 | 330 | R_0402_1005Metric | R14, R15 |
| 3 | 10K 10k | R_0402_1005Metric | R16, R27, R28 |
| 4 | 2k | R_0402_1005Metric | R21, R22, R23, R24 |
| 1 | 0 | R_0603_1608Metric | R25 |
| 1 | 0 | R_0402_1005Metric | R26 |
| 4 | 33 | R_Array_Convex_4x0402 | RN1, RN2, RN3, RN4 |
2.5in-IDE-SSD design files
The KiCad project lives in the dosdude1/2.5-inch-ide-ssd repository on GitHub; these links point at the commit this page was built from.
2.5in-IDE-SSD: common questions
How big is the 2.5in-IDE-SSD PCB?
The 2.5in-IDE-SSD measures 65 × 49.8 mm, has 4 copper layers and is 1.18 mm thick.
How many components are on the 2.5in-IDE-SSD?
69 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2.5in-IDE-SSD design files?
From the dosdude1/2.5-inch-ide-ssd repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2.5in-IDE-SSD design in my own project?
Yes, under the terms of its GPL-3.0 license, which dosdude1 chose for the repository.