2.5in-IDE-SSD-no lengthmatch

dosdude1·2.5-inch-ide-ssd·PCB/2.5in-IDE-SSD-no-lengthmatch.kicad_pcb

2.5in-IDE-SSD-no lengthmatch PCB layout, top view — open source board by dosdude1

About the 2.5in-IDE-SSD-no lengthmatch PCB

2.5in-IDE-SSD-no lengthmatch is an open source PCB design by dosdude1, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 65 × 49.8 mm, with 82 components from 22 distinct parts.

Other key parts include the SM2236, TLV75533PDRV, FlashBGA152 and TLV75518PDRV. By type, the board carries 42 capacitors, 30 resistors, 7 ICs, 2 connectors and 1 diode.

From the project

A custom-designed IDE SSD for use in any machine that utilizies a 2.5" IDE hard disk.

A custom-designed IDE SSD for use in any machine that utilizies a 2.5" IDE hard disk.

The design is based on the Silicon Motion SM2236 controller, and is compatible with up to four 512Gbit (64GB) BGA152 or BGA132 NANDs.

WARNING: THE SILICON MOTION SM2236 CONTROLLER PINOUT AND IMPLEMENTATION HAVE BEEN REVERSE ENGINEERED FROM OPEN DOCUMENTS AND SALVAGED PCBS, ALL OF WHICH HAVE BEEN LEGALLY OBTAINED. DO NOT EXPECT THIS TO BE CORRECT, CHECK FOR YOURSELF.

Main components on the 2.5in-IDE-SSD-no lengthmatch

2.5in-IDE-SSD-no lengthmatch bill of materials (BOM)

82 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SM2236
U1
1
TLV75533PDRV
U2
4
FlashBGA152
U3, U4, U5, U6
1
TLV75518PDRV
U7
1
Conn_02x22_Odd_Even
J1
1
Conn_02x02_Odd_Even
J2
1
LED
D1
1
10UF
10uF
C1
25
100NF
100nF
C2, C4, C6, C8, C10, C11, C14, C15 +17
4
150NF
0.12uF
C3, C5, C7, C9
4
1UF
1uF
C12, C13, C41, C42
8
10UF
10uF
C25, C26, C27, C28, C37, C38, C39, C40
8
82
R1, R5, R6, R8, R9, R10, R11, R12
3
22
R2, R3, R7
2
0
R4, R26
2
0
R13, R25
1
330
R14
1
330
300
R15
1
10K
10k
R16
4
NS
R17, R18, R19, R20
Show 2 more
QtyPartRefs
4
2k
R21, R22, R23, R24
4
33
RN1, RN2, RN3, RN4

2.5in-IDE-SSD-no lengthmatch design files

The KiCad project lives in the dosdude1/2.5-inch-ide-ssd repository on GitHub; these links point at the commit this page was built from.

2.5in-IDE-SSD-no lengthmatch: common questions

How big is the 2.5in-IDE-SSD-no lengthmatch PCB?

The 2.5in-IDE-SSD-no lengthmatch measures 65 × 49.8 mm, has 4 copper layers and is 1.18 mm thick.

How many components are on the 2.5in-IDE-SSD-no lengthmatch?

82 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 2.5in-IDE-SSD-no lengthmatch design files?

From the dosdude1/2.5-inch-ide-ssd repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the 2.5in-IDE-SSD-no lengthmatch design in my own project?

Yes, under the terms of its GPL-3.0 license, which dosdude1 chose for the repository.

More boards in 2.5-inch-ide-ssd