Infidel sensor
drspangle·infidel-sensor·electrical/smt/KiCAD/filaSens.kicad_pcb
About the Infidel sensor PCB
Infidel sensor is an open source AVR/Arduino PCB design by drspangle, published on GitHub under the CC0-1.0 license. It is a board measuring 50 × 20 mm, with 16 components from 14 distinct parts.
Its main chip is the 556-ATTINY85V10SU, from the AVR/Arduino family. Other key parts include the SS495. By type, the board carries 5 resistors, 2 ICs, 2 jumpers, 2 capacitors, 1 switch and 1 LED.
It belongs with the sensors designs in this gallery.
From the project
Firmware, mechanical and electrical design files for the Inline Filament Diameter Estimator, Lowcost (InFiDEL).
A cheap, yet precise filament diameter sensor, intended to compensate for filament diameter deviations in real-time.
The InFiDEL is a cheap (< $5) filament diameter sensor intended for use with FDM 3d printers. The sensor can be calibrated to provide surprisingly precise filament diameter readings in real-time. The main idea is to use the sensor to correct for filament diameter deviations while printing.

Main components on the Infidel sensor
Infidel sensor bill of materials (BOM)
16 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SS495 | SIP3-UA | IC2 |
| 1 | 556-ATTINY85V10SU TINY85 | SOIC8 | IC3 |
| 2 | MOUNT-PAD-ROUND3.0 | 3,0-PAD | H1, H2 |
| 1 | OUTPUT | 1X06 | JP1 |
| 1 | SUPPORT_ROW | 1X06 | JP2 |
| 1 | 642-ADTSM63NVTR MOMENTARY-SWITCH-SPST-SMD-6.2MM-TALL | TACTILE_SWITCH_SMD_6.2MM_TALL | S1 |
| 1 | ISP | MA03-2 | SV1 |
| 1 | 604-AA1608SURSK CHIP-FLAT-Y_0603-0.35MM | LEDC1608X35N_FLAT-Y | LED1 |
| 2 | 81-GRM155R60J106ME7D 10uF | C0402 | C1, C2 |
| 1 | 667-ERA-2VEB1001X 1k | R0402 | R1 |
| 1 | 667-ERA-2ARB363X 36k | R0402 | R2 |
| 1 | 667-ERJ-2RHD9101X 9k1 | R0402 | R3 |
| 1 | 667-ERA-2AEB183X 18k | R0402 | R4 |
| 1 | 667-ERA-2VEB4701X 4k7 | R0402 | R5 |
Infidel sensor design files
The KiCad project lives in the drspangle/infidel-sensor repository on GitHub; these links point at the commit this page was built from.
Infidel sensor: common questions
What microcontroller does the Infidel sensor use?
The Infidel sensor is built around the 556-ATTINY85V10SU, from the AVR/Arduino family.
How big is the Infidel sensor PCB?
The Infidel sensor measures 50 × 20 mm and is 1.6 mm thick.
How many components are on the Infidel sensor?
16 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Infidel sensor design files?
From the drspangle/infidel-sensor repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Infidel sensor design in my own project?
Yes, under the terms of its CC0-1.0 license, which drspangle chose for the repository.
Can I test firmware for the Infidel sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k