K9HZ 100W TempMonitor
About the K9HZ 100W TempMonitor PCB
K9HZ 100W TempMonitor is an open source PCB design by DRWJSCHMIDT, published on GitHub. It is a 2-layer board measuring 32.4 × 24.8 mm, with 11 components from 8 distinct parts.
Other key parts include the ADT75. By type, the board carries 4 resistors, 2 connectors, 2 inductors, 2 capacitors and 1 IC.
From the project
K9HZ Electronic Kits
Main components on the K9HZ 100W TempMonitor
K9HZ 100W TempMonitor bill of materials (BOM)
11 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADT75 | MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | Over-Temp Alarm | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Temp monitor | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | FB | L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1 | L1 |
| 1 | FB | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L2 |
| 2 | 0.1uF 50V | C_1206_3216Metric | C1, C8 |
| 3 | 3k3 | R_1206_3216Metric | R1, R2, R3 |
| 1 | 10k | R_1206_3216Metric | R6 |
K9HZ 100W TempMonitor design files
The KiCad project lives in the DRWJSCHMIDT/K9HZ repository on GitHub; these links point at the commit this page was built from.
- LayoutK9HZ_100W_PA_MRF454_Vers/K9HZ_100W_PA_KiCad/K9HZ_100W_TempMonitor_KiCad/K9HZ_100W_TempMonitor_KiCad.kicad_pcb
- SchematicK9HZ_100W_PA_MRF454_Vers/K9HZ_100W_PA_KiCad/K9HZ_100W_TempMonitor_KiCad/K9HZ_100W_TempMonitor_KiCad.kicad_sch
- BOMK9HZ_LPF_Module/K9HZ_LPF_BOMs/Old files/K9HZ_100W_LPF-Filter_Board_BOM_V1.00_09-22-24.xlsx
K9HZ 100W TempMonitor: common questions
How big is the K9HZ 100W TempMonitor PCB?
The K9HZ 100W TempMonitor measures 32.4 × 24.8 mm, has 2 copper layers and is 1.24 mm thick.
How many components are on the K9HZ 100W TempMonitor?
11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the K9HZ 100W TempMonitor design files?
From the DRWJSCHMIDT/K9HZ repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the K9HZ 100W TempMonitor design in my own project?
The repository has no license, so all rights stay with DRWJSCHMIDT. Use it as a reference, and ask the author before reusing the design.
More boards in K9HZ
K9HZ 100W 11band LPF-Filter
100 × 100 mm167 parts4LNo license18
K9HZ 100W 11band LPF-Control
100 × 100 mm150 parts4LNo license18
TeensyMaestro Main
197.3 × 121.2 mm107 parts2LNo license18
K9HZ 100W KiCad 2
125 × 83.7 mm79 parts2LNo license18
K9HZ 100W
125 × 83.7 mm79 parts2LNo license18
K9HZ Antenna Tuner Control Board
71 × 81.2 mm55 parts2LNo license18
K9HZ 100W AUTO TUNER RF BOARD
100 × 100 mm48 parts2LNo license18- schematic only · 37 parts
K9HZ 100W PA MRF454 Vers
37 parts2LNo license18 
K9HZ 100W 11band LPF-TR-carrier 01 06 26
61.5 × 25.4 mm12 parts2LNo license18
K9HZ 100W 11band LPF-TR-carrier
40.6 × 25.4 mm12 parts2LNo license18
TeensyMaestro Front Panel
205.5 × 129.3 mm6 parts2LNo license18