Daisy tone trixter

dylangmiles·daisy-tone-trixter·pcb/tone_trixter.kicad_pcb

Daisy tone trixter PCB layout, top view — open source board by dylangmiles

About the Daisy tone trixter PCB

Daisy tone trixter is an open source PCB design by dylangmiles, published on GitHub. It is a 2-layer board measuring 132 × 57 mm, with 83 components from 36 distinct parts.

Other key parts include the OPA1642AIDR and Daisy Seed3. By type, the board carries 32 resistors, 31 capacitors, 10 connectors, 5 diodes, 4 ICs and 1 fuse.

From the project

KiCad 10 project. The schematic is GENERATED: edit tools/genschematic.py, run it, never hand-edit tonetrixter.kicadsch (the next run overwrites it). Design intent and every value's reason are in private/docs/daisypcbbrief2026-09-16.md; pin numbers come from ../board.h.

KiCad 10 project. The schematic is GENERATED: edit tools/genschematic.py, run it, never hand-edit tonetrixter.kicadsch (the next run overwrites it). Design intent and every value's reason are in private/docs/daisypcbbrief2026-09-16.md; pin numbers come from ../board.h.

Check: kicad-cli sch erc tonetrixter.kicadsch (only "symbol differs from library" notices expected — the op-amp and SD symbols are flattened copies) and kicad-cli sch export netlist. genschematic.py also runs a wire-through-pin check and prints CHECK:` lines if any wire crosses a pin it should not.

Main components on the Daisy tone trixter

Daisy tone trixter bill of materials (BOM)

83 components, 36 distinct parts.

QtyPartRefs
3
OPA1642AIDR
U1, U2, U3
1
Daisy Seed3
U4
1
INA jack lead
J1
1
OUT jack lead
J2
1
DC 2.1mm lead
J3
1
Battery lead
J4
1
Enclosure bond
J5
1
OLED 1.3" 7-pin
J6
1
SW-L bypass
J7
1
INB jack lead
J8
1
SW-R tuner
J9
1
microSD DM3AT
J10
1
500mA
F1
2
SS34
D1, D2
1
SMAJ15A
D3
1
3mm engaged
D4
1
3mm record
D5
2
100u/25V
C1, C4
2
10u
C2, C18
9
100n
C3, C17, C22, C23, C24, C25, C29, C30 +1
Show 16 more
QtyPartRefs
6
10u film
C5, C8, C11, C14, C19, C21
3
100p
C6, C12, C20
2
1n
C7, C13
2
330p
C9, C15
2
33n
C10, C16
3
10n
C26, C27, C28
6
100R
R1, R3, R8, R10, R15, R21
3
1M
R2, R9, R16
2
3k3
R4, R11
11
10k
R6, R7, R13, R14, R22, R27, R28, R29 +3
1
470k
R17
2
15k
R18, R19
1
0R (18k = +7 dB)
R20
2
33R
R23, R24
2
4k7
R25, R26
2
1k
R32, R33

Daisy tone trixter design files

The KiCad project lives in the dylangmiles/daisy-tone-trixter repository on GitHub; these links point at the commit this page was built from.

Daisy tone trixter: common questions

How big is the Daisy tone trixter PCB?

The Daisy tone trixter measures 132 × 57 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Daisy tone trixter?

83 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the Daisy tone trixter design files?

From the dylangmiles/daisy-tone-trixter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Daisy tone trixter design in my own project?

The repository has no license, so all rights stay with dylangmiles. Use it as a reference, and ask the author before reusing the design.