5 open source boards using the OPA1642AIDR
Real designs built with the OPA1642AIDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ECM XLR microphone
AXinsLab
38.8 × 75 mm30 parts2LGPL-3.049ESP32
Uberamp1
DeepSOIC
130 × 82 mm520 parts2LNo license3Daisy tone trixter
dylangmiles
132 × 57 mm83 parts2LNo license0ESP32
Cotuca cerebro
Belquer
180 × 100 mm58 parts2LNo license0Fx ret
dj-filippo241
100 × 220 mm197 parts4LNo license2
How designs wire the OPA1642AIDR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the OPA1642AIDR connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a series resistor on 5 of 5 designs, most often 2.2 kΩ (then 240 Ω).
- The - pins have a series resistor on 5 of 5 designs, most often 10 kΩ (then 2.2 kΩ).
- Pin 7 has a series resistor on 5 of 5 designs, most often 10 kΩ (then 100 Ω).
- The + pins have a series resistor on 4 of 5 designs, most often 100 Ω (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| -pin 2, 6 | Connected to: Signal 100% |
|
| +pin 3, 5 | Connected to: Signal 80% |
|
| V-pin 4 | Connected to: GND 80% · -18V 20% | — |
| Pin 7 | Connected to: Signal 100% |
|
| V+pin 8 | Connected to: 12V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ECM XLR microphone by AXinsLab, Uberamp1 by DeepSOIC, Fx ret by dj-filippo241 and Cotuca cerebro by Belquer.
The OPA1642AIDR in open source designs
The gallery holds 5 open source boards using the OPA1642AIDR from 5 GitHub repositories; a typical one measures about 130 × 82 mm and carries around 83 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is ECM XLR microphone by AXinsLab.
Parts used alongside the OPA1642AIDR
Microcontrollers on boards using the OPA1642AIDR
What boards using the OPA1642AIDR are built for
OPA1642AIDR: common questions
Where can I find a OPA1642AIDR reference design?
Each of the 5 boards on this page is a real design using the OPA1642AIDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the OPA1642AIDR pin 1?
Pin 1 has a series resistor on 5 of 5 designs, most often 2.2 kΩ (then 240 Ω). Counted from the KiCad layouts of 5 open source designs using the OPA1642AIDR.
What resistor goes on the OPA1642AIDR - pin?
The - pins have a series resistor on 5 of 5 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the OPA1642AIDR.
What resistor goes on the OPA1642AIDR pin 7?
Pin 7 has a series resistor on 5 of 5 designs, most often 10 kΩ (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the OPA1642AIDR.
Which microcontrollers do boards using the OPA1642AIDR use?
Most are built on ESP32 (2).
How big is a typical board using the OPA1642AIDR?
The median is 130 × 82 mm, and 80% are two-layer designs.
What is the most popular open source board using the OPA1642AIDR?
By GitHub stars, ECM XLR microphone by AXinsLab, with 49 stars.
Can I simulate one of these boards using the OPA1642AIDR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.