Konnect maintained

dylbertram·konnect-maintained·crates/konnect-core/tests/fixtures/multichannel_channel_strip.kicad_sch

This repository ships a schematic but no board layout.

About the Konnect maintained PCB

Konnect maintained is an open source PCB design by dylbertram, published on GitHub under the AGPL-3.0 license. It is a board, with 104 components from 9 distinct parts.

Other key parts include the TL072CD. By type, the board carries 44 resistors, 36 capacitors, 4 ICs and 4 connectors.

From the project

Independent maintenance of the archived mixelpixx/Konnect project. KiCad MCP tooling, retaining its AGPL-3.0 license and contributor history.

This is an independent maintenance repository derived from mixelpixx/Konnect, created by @mixelpixx and its contributors. The original repository was archived in October 2026. Its Git history, contributor attribution, and AGPL-3.0 license are preserved here.

Maintained by @dylbertram. This project is not affiliated with or endorsed by Orchis.ai LLC or its commercial Konnect-EDA product.

Main components on the Konnect maintained

Konnect maintained bill of materials (BOM)

104 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
TL072CD
TEXAS INSTRUMENTS
IC2, IC3, IC4, IC5
4
CH1
J1, J7, J8, J9
4
Mid
RV1, RV5, RV9, RV13
4
Bass
RV2, RV6, RV10, RV14
4
Treble
RV3, RV7, RV11, RV15
4
Volume
RV4, RV8, RV12, RV16
8
CTEB_2.2UF_35V_10%_254-500X840
KEMET
C5, C13, C14, C22, C23, C31, C32, C40
28
CC1206_100NF_50V_10%_X7R
GENERIC
C6, C7, C8, C9, C10, C11, C12, C15 +20
44
R1206_10K_1%_0.25W_100PPM
GENERIC
R4, R5, R6, R7, R8, R9, R10, R11 +36

Konnect maintained design files

The KiCad project lives in the dylbertram/konnect-maintained repository on GitHub; these links point at the commit this page was built from.

Konnect maintained: common questions

How many components are on the Konnect maintained?

104 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Konnect maintained design files?

From the dylbertram/konnect-maintained repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.

Can I use the Konnect maintained design in my own project?

Yes, under the terms of its AGPL-3.0 license, which dylbertram chose for the repository.