13 open source boards using the TL072CD
Real designs built with the TL072CD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 104 parts
Konnect
mixelpixx
104 partsAGPL-3.01.4k Test1
pginfinitylab-ai
110 × 111 mm114 parts2LNo license0Multichannel mixer
tk-tobi
110 × 111 mm114 parts2LNo license0RP2040/RP2350
Camberwell Parrot
AudioMorphology
117.2 × 110 mm96 parts2LGPL-3.00- schematic only · 104 parts
Konnect maintained
dylbertram
104 partsAGPL-3.00 Multichannel mixer unrouted
tk-tobi
110 × 111 mm114 parts2LNo license0RP2040/RP2350
Toepler plus
niektb
20 × 106 mm112 parts2LCC-BY-SA-4.034Multichannel mixer
claynicholson
110 × 111 mm114 parts2LMIT102Andes
niektb
40 × 110 mm109 parts2LCC-BY-SA-4.034Multichannel mixer
nickradfc
110 × 111 mm114 parts2LNo license0Herford
niektb
40 × 110 mm109 parts2LCC-BY-SA-4.034Multichannel mixer unrouted
nickradfc
110 × 111 mm114 parts2LNo license0Divn
niektb
20 × 100 mm60 parts2LCC-BY-SA-4.034
How designs wire the TL072CD
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TL072CD connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pins have a series resistor on 6 of 6 designs, most often 100 kΩ (then 5.6 kΩ).
- The IN- pins have a series resistor on 6 of 6 designs, most often 100 kΩ (then 22 kΩ).
- The IN+ pins have a resistor to GND on 5 of 6 designs, most often 47 kΩ.
- The V+ pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1, 7 | Connected to: TL072CD 33% |
|
| IN-pin 2, 6 | Connected to: TL072CD 33% |
|
| IN+pin 3, 5 | Connected to: TL072CD 33% · GND 17% |
|
| V-pin 4 | Connected to: GND 67% · -12V 17% · a signal 17% | — |
| V+pin 8 | Connected to: 12V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Multichannel mixer by claynicholson, Andes by niektb, Camberwell Parrot by AudioMorphology and Multichannel mixer by nickradfc.
The TL072CD in open source designs
The gallery holds 13 open source boards using the TL072CD from 8 GitHub repositories; a typical one measures about 110 × 111 mm and carries around 112 components.
100% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is Konnect by mixelpixx.
Microcontrollers on boards using the TL072CD
What boards using the TL072CD are built for
TL072CD: common questions
Where can I find a TL072CD reference design?
Each of the 13 boards on this page is a real design using the TL072CD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL072CD OUT pin?
The OUT pins have a series resistor on 6 of 6 designs, most often 100 kΩ (then 5.6 kΩ). Counted from the KiCad layouts of 6 open source designs using the TL072CD.
What resistor goes on the TL072CD IN- pin?
The IN- pins have a series resistor on 6 of 6 designs, most often 100 kΩ (then 22 kΩ). Counted from the KiCad layouts of 6 open source designs using the TL072CD.
What resistor goes on the TL072CD IN+ pin?
The IN+ pins have a resistor to GND on 5 of 6 designs, most often 47 kΩ. Counted from the KiCad layouts of 6 open source designs using the TL072CD.
Which microcontrollers do boards using the TL072CD use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the TL072CD?
The median is 110 × 111 mm, and 100% are two-layer designs.
What is the most popular open source board using the TL072CD?
By GitHub stars, Konnect by mixelpixx, with 1,435 stars.
Can I simulate one of these boards using the TL072CD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.