Esl dut dongle
DynamicDevices·esl-dut-dongle·hardware/schematics/esl-dut-dongle/esl-dut-dongle.kicad_pcb
About the Esl dut dongle PCB
Esl dut dongle is an open source PCB design by DynamicDevices, published on GitHub under the Custom license license. It is a 2-layer board, with 19 components from 12 distinct parts.
Other key parts include the FT4232H-56Q-REEL, INA219BIDCNT and INA228AIDGSR. By type, the board carries 8 capacitors, 3 ICs, 2 connectors, 2 resistors and 1 LED.
From the project
esl-dut-dongle
- USB Bridge: FTDI FT4232H (4 UARTs + GPIO) - Power Monitoring: Dual range - INA219 (μA) + INA228 (nA) - Shunt Resistors: 10Ω (INA219) + 0.01Ω (INA228) - Connector: USB Type-C - Target Interface: 2.54mm pitch headers
See docs/requirements/DESIGNSPEC.md` for complete design decisions.
1. Install KiCAD 9.0+ (docs/development/SETUP.md) 2. Create KiCAD project in this directory 3. Generate schematic with confirmed components
Main components on the Esl dut dongle
Esl dut dongle bill of materials (BOM)
19 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT4232H-56Q-REEL | QFN50P800X800X100-57N | U1 |
| 1 | INA219BIDCNT | SOT65P280X145-8N | U2 |
| 1 | INA228AIDGSR | SOP50P490X110-10N | U3 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Header_30pin | PinHeader_1x30_P2.54mm_Vertical | J2 |
| 1 | 1k | R_0805_2012Metric | R_LED1 |
| 1 | 10R | R_0805_2012Metric | R_SHUNT1 |
| 1 | 0.01R | R_0805_2012Metric | R_SHUNT2 |
| 1 | LED | LED_0805_2012Metric | LED1 |
| 7 | 0.1uF | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7 |
| 1 | 10uF | C_0805_2012Metric | C8 |
| 2 | 10k | R_0805_2012Metric | R1, R2 |
Esl dut dongle design files
The KiCad project lives in the DynamicDevices/esl-dut-dongle repository on GitHub; these links point at the commit this page was built from.
Esl dut dongle: common questions
How big is the Esl dut dongle PCB?
The Esl dut dongle has 2 copper layers and is 1.6 mm thick.
How many components are on the Esl dut dongle?
19 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esl dut dongle design files?
From the DynamicDevices/esl-dut-dongle repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esl dut dongle design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.