Gen5-PowerMonitor2
econode·Gen5-PowerMonitor2
About the Gen5-PowerMonitor2 PCB
Gen5-PowerMonitor2 is an open source PCB design by econode, published on GitHub. It is a 4-layer board measuring 68.8 × 95.2 mm, with 31 components from 24 distinct parts.
Other key parts include the INA226 and Opamp_Dual_COS5532. By type, the board carries 11 resistors, 6 diodes, 4 transistors, 4 connectors, 2 ICs and 1 fuse.
Main components on the Gen5-PowerMonitor2
Gen5-PowerMonitor2 bill of materials (BOM)
31 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA226 | VSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | Opamp_Dual_COS5532 | SOP-8_3.76x4.96mm_P1.27mm | U2 |
| 3 | AO3407 | SOT-23 | Q1, Q2, Q4 |
| 1 | FOSAN-BSS138 | TSOT-23 | Q3 |
| 1 | 5V REG D245F5 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Barrel_Jack | BarrelJack_Horizontal | J2 |
| 1 | Power in | TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | Load out | TerminalBlock_Altech_AK300-2_P5.00mm | J4 |
| 1 | Polyfuse 3amp | Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F1 |
| 1 | 20K | Potentiometer_Bourns_3224W_Vertical | RV1 |
| 1 | SW_DPDT_x2 | Slide-SW_DPDT_9.1mmx6.9mmP2.5 | SW1 |
| 1 | SmartTrap expansion port | ExpansionHeader_2x05_P2.54mm_Vertical | e1 |
| 1 | LED_LOAD | LED_0603_1608Metric | D1 |
| 3 | 5v6 | D_SOD-123 | D2, D3, D4 |
| 1 | LED_PWR_OK | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | D | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 2 | 10K | R_0603_1608Metric | R1, R10 |
| 1 | 1K | R_0603_1608Metric | R2 |
| 1 | 1M | R_0603_1608Metric | R3 |
| 2 | 39K | R_0603_1608Metric | R4, R9 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22K | R_0603_1608Metric | R5, R11 |
| 1 | 47K | R_0603_1608Metric | R6 |
| 1 | 0.1 | R_2512_6332Metric | R7 |
| 1 | 2.2K | R_0603_1608Metric | R8 |
Gen5-PowerMonitor2 design files
The KiCad project lives in the econode/Gen5-PowerMonitor2 repository on GitHub; these links point at the commit this page was built from.
- LayoutGen5-PowerMonitor2.kicad_pcb
- SchematicGen5-PowerMonitor2.kicad_sch
Gen5-PowerMonitor2: common questions
How big is the Gen5-PowerMonitor2 PCB?
The Gen5-PowerMonitor2 measures 68.8 × 95.2 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Gen5-PowerMonitor2?
31 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gen5-PowerMonitor2 design files?
From the econode/Gen5-PowerMonitor2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gen5-PowerMonitor2 design in my own project?
The repository has no license, so all rights stay with econode. Use it as a reference, and ask the author before reusing the design.