Edromufu
About the Edromufu PCB
Edromufu is an open source PCB design by edromufu, published on GitHub under the MIT license. It is a 2-layer board measuring 57.5 × 38.5 mm, with 26 components from 13 distinct parts.
Other key parts include the LM317L_TO92. By type, the board carries 10 connectors, 5 diodes, 3 capacitors, 3 resistors, 2 transistors and 1 IC.
From the project
Repositório da EDROM-UFU destinado ao desenvolvimento do projeto humanoide para participação nas competições LARC e ROBOCUP.
Main components on the Edromufu
Edromufu bill of materials (BOM)
26 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317L_TO92 | TO-220-3_Vertical | U1 |
| 2 | TIP35C | TO-3PB-3_Vertical | Q1, Q2 |
| 2 | XT60-M | AMASS_XT60-M | J1, J2 |
| 8 | 22-03-5035 | TTL_3pin | J3, J4, J5, J6, J7, J8, J9, J10 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 3296W-1-250 | TRIM_3296W-1-250 | VR1 |
| 4 | DIODE | D_A-405_P12.70mm_Horizontal | D1, D2, D3, D4 |
| 1 | LED | LED_D3.0mm | D5 |
| 1 | 4700uF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 2 | 0,1uF | CP_Radial_D6.3mm_P2.50mm | C2, C3 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 2200 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Edromufu design files
The KiCad project lives in the edromufu/edromufu repository on GitHub; these links point at the commit this page was built from.
Edromufu: common questions
How big is the Edromufu PCB?
The Edromufu measures 57.5 × 38.5 mm, has 2 copper layers and is 1.59 mm thick.
How many components are on the Edromufu?
26 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Edromufu design files?
From the edromufu/edromufu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Edromufu design in my own project?
Yes, under the terms of its MIT license, which edromufu chose for the repository.