Shawn hymel getting to blinky
eduardocgarza·shawn-hymel-getting-to-blinky·src/555 Badge.kicad_pcb
About the Shawn hymel getting to blinky PCB
Shawn hymel getting to blinky is an open source PCB design by eduardocgarza, published on GitHub under the MIT license. It is a 2-layer board measuring 53.9 × 85.6 mm, with 15 components from 12 distinct parts.
Other key parts include the 7555. By type, the board carries 7 resistors, 2 diodes, 2 capacitors, 1 IC, 1 transistor and 1 switch.
It belongs with the wearables designs in this gallery.
From the project
The files for the Getting to Blinky tutorial series with Shawn Hymel to build your first PCB
YouTube KiCad Tutorial - Shawn Hymel - PCB Design

Main components on the Shawn hymel getting to blinky
Shawn hymel getting to blinky bill of materials (BOM)
15 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 7555 | ICM7555IPAZ-PDIP | U1 |
| 1 | 2N3904 | TO-92-3 | Q1 |
| 1 | BS-7 MPD (Memory Protection Devices) | Battery_Holder_Coin_2032_BS-7 | BAT1 |
| 1 | EG1218 E-Switch | Switch_Slide_11.6x4mm_EG1218 | S1 |
| 2 | RED | LED_D3.0mm | D1, D2 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 100uF | CP_Radial_D5.0mm_P2.50mm | C2 |
| 2 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R7 |
| 2 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4 |
| 1 | 330k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
Shawn hymel getting to blinky design files
The KiCad project lives in the eduardocgarza/shawn-hymel-getting-to-blinky repository on GitHub; these links point at the commit this page was built from.
- Layoutsrc/555 Badge.kicad_pcb
- Schematicsrc/555 Badge.kicad_sch
Shawn hymel getting to blinky: common questions
How big is the Shawn hymel getting to blinky PCB?
The Shawn hymel getting to blinky measures 53.9 × 85.6 mm, has 2 copper layers and is 1.64592 mm thick.
How many components are on the Shawn hymel getting to blinky?
15 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Shawn hymel getting to blinky design files?
From the eduardocgarza/shawn-hymel-getting-to-blinky repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Shawn hymel getting to blinky design in my own project?
Yes, under the terms of its MIT license, which eduardocgarza chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k