16 open source boards using the 7555

Real designs built with the 7555, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the 7555

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 7555 connects to, and the resistors, capacitors and other passives placed on it.

  • The TRIG pin has a series resistor on 14 of 14 designs, most often 470 kΩ (then 330 kΩ).
  • The THRESH pin has a series resistor on 14 of 14 designs, most often 470 kΩ (then 330 kΩ).
  • The DIS pin has a series resistor on 14 of 14 designs, most often 470 kΩ (then 330 kΩ).
  • The TRIG pin has a capacitor to GND on 13 of 14 designs, most often 10 µF (then 1 µF).
GNDpin 1Connected to: GND 93%
TRIGpin 2Connected to: Signal 100%
  • Series resistor on 100% · 470 kΩ (6), 330 kΩ (6), 17.4 kΩ (1)
  • Capacitor to GND on 93% · 10 µF (6), 1 µF (3)
OUTpin 3Connected to: Signal 100%
  • Series resistor on 93% · 1 kΩ (6), 22 kΩ (6), 220 Ω (1)
RSTpin 4Connected to: VCC 86%
CVpin 5Connected to: Not connected 71%
THRESHpin 6Connected to: Signal 100%
  • Series resistor on 100% · 470 kΩ (6), 330 kΩ (6), 17.4 kΩ (1)
  • Capacitor to GND on 93% · 10 µF (6), 1 µF (3)
DISpin 7Connected to: Signal 100%
  • Series resistor on 100% · 470 kΩ (6), 330 kΩ (6), 470 Ω (2)
  • Pull-up to VCC on 86% · 22 kΩ (6), 1 kΩ (5), 10 kΩ (1)
VDDpin 8Connected to: VCC 86%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Blinky by AravinthPanch, 555 badge by ShawnHymel, SBC6120 Mini Front Panel by djtersteegc and 555 timer2 by HrishikeshMRao.

The 7555 in open source designs

The gallery holds 16 open source boards using the 7555 from 14 GitHub repositories; a typical one measures about 53.8 × 85.1 mm and carries around 15 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Blinky by AravinthPanch.

What boards using the 7555 are built for

7555: common questions

Where can I find a 7555 reference design?

Each of the 16 boards on this page is a real design using the 7555. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 7555 TRIG pin?

The TRIG pin has a series resistor on 14 of 14 designs, most often 470 kΩ (then 330 kΩ). Counted from the KiCad layouts of 14 open source designs using the 7555.

What resistor goes on the 7555 THRESH pin?

The THRESH pin has a series resistor on 14 of 14 designs, most often 470 kΩ (then 330 kΩ). Counted from the KiCad layouts of 14 open source designs using the 7555.

What resistor goes on the 7555 DIS pin?

The DIS pin has a series resistor on 14 of 14 designs, most often 470 kΩ (then 330 kΩ). Counted from the KiCad layouts of 14 open source designs using the 7555.

How big is a typical board using the 7555?

The median is 53.8 × 85.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the 7555?

By GitHub stars, Blinky by AravinthPanch, with 16 stars.

Can I simulate one of these boards using the 7555 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part