Edwardash - thumbfing
EdwardCoventry·edwardash·PCB/0.2/edwardash - thumbfing.kicad_pcb
About the Edwardash - thumbfing PCB
Edwardash - thumbfing is an open source PCB design by EdwardCoventry, published on GitHub. It is a 2-layer board measuring 132.5 × 110.1 mm, with 102 components from 14 distinct parts.
Other key parts include the HOLE and ProMicro. By type, the board carries 41 diodes, 25 resistors, 23 switches, 7 ICs, 4 connectors and 1 transistor.
From the project
a 30+6 key version of omkb's ergodash
Main components on the Edwardash - thumbfing
Edwardash - thumbfing bill of materials (BOM)
102 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | HOLE | hole | U1, U4, U5, U7, U9 |
| 2 | ProMicro | ProMicro_rev | U3, U6 |
| 1 | IRLML6344TRPbF | SOT-23_2 | Q1 |
| 1 | 5PIN | trrs_jack | J1 |
| 1 | Conn_01x03 | conn3 | J2 |
| 2 | GS3 | jumper2 | J4, J5 |
| 21 | SW_PUSH | MX_ALPS | SW6, SW7, SW8, SW10, SW11, SW12, SW14, SW15 +13 |
| 2 | SW_Push | tact_switch2 | SW29, SW37 |
| 1 | jumper_smd | jumper_smd_2dub | W1 |
| 20 | D | Diode_SMD_THT3 | D6, D7, D8, D10, D11, D12, D14, D15 +12 |
| 21 | LED | CHERRY_MX_LED2 | D43, D44, D45, D46, D47, D50, D51, D52 +13 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 22 | R | Resistors_SMD_THT | R11, R12, R14, R15, R16, R17, R20, R21 +14 |
| 1 | 1k | Resistors_SMD_THT | R13 |
Edwardash - thumbfing design files
The KiCad project lives in the EdwardCoventry/edwardash repository on GitHub; these links point at the commit this page was built from.
Edwardash - thumbfing: common questions
How big is the Edwardash - thumbfing PCB?
The Edwardash - thumbfing measures 132.5 × 110.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Edwardash - thumbfing?
102 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Edwardash - thumbfing design files?
From the EdwardCoventry/edwardash repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Edwardash - thumbfing design in my own project?
The repository has no license, so all rights stay with EdwardCoventry. Use it as a reference, and ask the author before reusing the design.