Screen Firmware
egeozemek·Screen_Firmware·audio_and_microphone/audio_and_microphone.kicad_pcb
About the Screen Firmware PCB
Screen Firmware is an open source PCB design by egeozemek, published on GitHub. It is a 2-layer board measuring 69 × 54 mm, with 38 components from 20 distinct parts.
Other key parts include the TLV313IDBVT and LM4875MM. By type, the board carries 17 capacitors, 14 resistors, 4 connectors and 3 ICs.
It belongs with the audio and displays & leds designs in this gallery.
From the project
A low-cost tympanometer designed to diagnose hearing loss in children, developed as part of the Duke BME Design Fellows program at Duke University's Pratt School of Engineering under the supervision of Dr. Mark Palmeri, MD PhD.
A low-cost tympanometer designed to diagnose hearing loss in children, developed as part of the Duke BME Design Fellows program at Duke University's Pratt School of Engineering under the supervision of Dr. Mark Palmeri, MD PhD.
- Duke BME Designers Develop a New Tool to Inexpensively Diagnose Hearing Loss in Children - Preventing Childhood Hearing Loss Worldwide

Main components on the Screen Firmware
Screen Firmware bill of materials (BOM)
38 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TLV313IDBVT | TSOT-23-5 | U1, U3 |
| 1 | LM4875MM | SOP65P490X110-8N | U2 |
| 3 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1, J3, J4 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 14 | 0.1U 0.1u | CAPC17595_95N_KEM-M | C1, C2, C3, C4, C5, C6, C9, C10 +6 |
| 2 | 1.0U 1.0u | CAPC17595_95N_KEM-M | C7, C8 |
| 1 | 0.2U 0.2u | CAPC17595_95N_KEM-M | C15 |
| 2 | 6.8K | RC0603N_YAG-M | R1, R2 |
| 1 | 6.98K | RC0603N_YAG-M | R3 |
| 1 | 100K | RC0603N_YAG-M | R4 |
| 1 | 100K 1.5K | RC0603N_YAG-M | R5 |
| 1 | 1.5K 300 | RC0603N_YAG-M | R6 |
| 1 | 300 6.2K | RC0603N_YAG-M | R7 |
| 1 | 150k | RC0603N_YAG-M | R8 |
| 1 | 6.2K 27k | RC0603N_YAG-M | R9 |
| 1 | 150K 10k | RC0603N_YAG-M | R10 |
| 1 | 27K 13.3k | RC0603N_YAG-M | R11 |
| 1 | 10K 27k | RC0603N_YAG-M | R12 |
| 1 | 13.3K 22K | RC0603N_YAG-M | R13 |
| 1 | 27K 820K | RC0603N_YAG-M | R14 |
Screen Firmware design files
The KiCad project lives in the egeozemek/Screen_Firmware repository on GitHub; these links point at the commit this page was built from.
Screen Firmware: common questions
How big is the Screen Firmware PCB?
The Screen Firmware measures 69 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Screen Firmware?
38 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Screen Firmware design files?
From the egeozemek/Screen_Firmware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Screen Firmware design in my own project?
The repository has no license, so all rights stay with egeozemek. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k