Simple Tungsten Tip Etcher
ehremington·tungsten_etcher·Electrical/Simple Tungsten Tip Etcher/Simple Tungsten Tip Etcher.kicad_pcb
About the Simple Tungsten Tip Etcher PCB
Simple Tungsten Tip Etcher is an open source PCB design by ehremington, published on GitHub. It is a 2-layer board measuring 100.1 × 104.1 mm, with 65 components from 24 distinct parts.
Other key parts include the IRFD120, IRFD9120, LF412_SOIC, LM7815CT/NOPB and LM317T. By type, the board carries 49 ICs, 8 resistors, 2 switches, 2 LEDs and 1 connector.
From the project
this is just a place where i can keep things for chat to digest them
Main components on the Simple Tungsten Tip Etcher
Simple Tungsten Tip Etcher bill of materials (BOM)
65 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | EtchingConnector | U1 |
| 1 | IRFD120 | IRFD120 | U2 |
| 1 | IRFD9120 | IRFD9120 | U3 |
| 2 | LF412_SOIC | LF412_SOIC | U4, U38 |
| 2 | ~ | Grounding Bar | U5, U79 |
| 12 | ~ | TestPoint | U6, U7, U8, U9, U10, U11, U12, U13 +4 |
| 2 | ~ | Pot_5K_10Turn | U14, U27 |
| 21 | ~ | Decoup_Cap_1206 | U15, U16, U29, U30, U31, U32, U33, U34 +13 |
| 1 | ~ | Gateron_Low_Profile_Blue_Switch | U18 |
| 2 | ~ | N7812-CW | U21, U23 |
| 1 | LM7815CT/NOPB | LM7815CT | U22 |
| 1 | LM317T | LM317T | U65 |
| 1 | ~ | OpenSourceIsLove | U71 |
| 1 | LT1224 | LT1224 | U75 |
| 1 | Barrel_Jack | Barrel_Jack | J3 |
| 2 | 47R 2512 | 47R_2512 | 47R1, 47R2 |
| 1 | 510R 2512 | 510R_2512 | 510R1 |
| 1 | DPDT Switch | DPDT Switch | S1 |
| 1 | SW2_S101031MS02Q_CNK | SPST_Power_Switch | SW1 |
| 2 | GreenLED_20mA_3.2V | GreenLED_20mA_3.2V | LED1, LED2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 590R_0.5W | 590R | R1 |
| 1 | 806R_0.5W | 806R_0.5W | R2 |
| 1 | 10k_Trimmer_Pot | 10k_Trimmer_Pot | R3 |
| 5 | 1kR | 1kR_1210 | R4, R5, R6, R7, R8 |
Simple Tungsten Tip Etcher design files
The KiCad project lives in the ehremington/tungsten_etcher repository on GitHub; these links point at the commit this page was built from.
Simple Tungsten Tip Etcher: common questions
How big is the Simple Tungsten Tip Etcher PCB?
The Simple Tungsten Tip Etcher measures 100.1 × 104.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple Tungsten Tip Etcher?
65 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simple Tungsten Tip Etcher design files?
From the ehremington/tungsten_etcher repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Simple Tungsten Tip Etcher design in my own project?
The repository has no license, so all rights stay with ehremington. Use it as a reference, and ask the author before reusing the design.