Pirat metal detector
ein-erin·pirat-metal-detector·pcb/pirat.kicad_pcb
About the Pirat metal detector PCB
Pirat metal detector is an open source PCB design by ein-erin, published on GitHub. It is a 2-layer board measuring 49 × 48 mm, with 45 components from 37 distinct parts.
Other key parts include the NE555, 3608 and NJM4565. By type, the board carries 19 resistors, 10 capacitors, 6 connectors, 3 ICs, 3 transistors and 2 diodes.
From the project
PIRAT (Pulse Induction) metal detector PCB

Main components on the Pirat metal detector
Pirat metal detector bill of materials (BOM)
45 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | 3608 | SOT-23-6 | U2 |
| 1 | NJM4565 | SOIC-8 | U3 |
| 1 | BC856 | SOT-23 | Q1 |
| 1 | IRF740 | TO-220-3_Vertical_GDS | Q2 |
| 1 | BC846 | SOT-23 | Q3 |
| 1 | - | TestPoint_THTPad_D3.0mm_Drill1.5mm | J1 |
| 1 | + | TestPoint_THTPad_D3.0mm_Drill1.5mm | J2 |
| 2 | COIL | TestPoint_THTPad_D3.0mm_Drill1.5mm | J3, J4 |
| 2 | SPK | TestPoint_THTPad_D2.5mm_Drill1.2mm | J5, J6 |
| 1 | POWER ON | Switch_SPDT_Hole | SW1 |
| 1 | SS34 | D_SMA | D1 |
| 1 | BAV99 | SOT-23 | D2 |
| 1 | 22uH | Inductor_SMD_CD74R | L1 |
| 2 | 100n | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C2 |
| 2 | 1uF | C_1206 | C3, C7 |
| 3 | 10uF | C_1206 | C4, C6, C10 |
| 1 | 1n | C_1206 | C5 |
| 1 | 2200uFx16v | CP_Radial_D10.0mm_P5.00mm | C8 |
| 1 | 100uF | C_1206 | C9 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_1206 | R1 |
| 1 | 1,6k | R_1206 | R2 |
| 1 | 100k | R_1206 | R3 |
| 1 | 470 | R_1206 | R4 |
| 1 | 100 | R_1206 | R5 |
| 1 | 150 | R_1206 | R6 |
| 1 | 220 (390) | R_2512 | R7 |
| 1 | 390 | R_2512 | R8 |
| 2 | 47k | R_1206 | R9, R14 |
| 1 | 62k | R_1206 | R10 |
| 2 | 470k | R_1206 | R11, R16 |
| 1 | 100k | Potentiometer_16mm_Hole | R12 |
| 1 | 10k | Potentiometer_16mm_Hole | R13 |
| 1 | 120k | R_1206 | R15 |
| 1 | 10 | R_1206 | R17 |
| 1 | 110k | R_1206 | R18 |
| 1 | 5,6k | R_1206 | R19 |
Pirat metal detector design files
The KiCad project lives in the ein-erin/pirat-metal-detector repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/pirat.kicad_pcb
- Schematicpcb/pirat.kicad_sch
Pirat metal detector: common questions
How big is the Pirat metal detector PCB?
The Pirat metal detector measures 49 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pirat metal detector?
45 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pirat metal detector design files?
From the ein-erin/pirat-metal-detector repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pirat metal detector design in my own project?
The repository has no license, so all rights stay with ein-erin. Use it as a reference, and ask the author before reusing the design.