113 open source boards using the NE555

Real designs built with the NE555, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

113 boardsClear filters|Most starred

How designs wire the NE555

Read from the KiCad layouts of 72 open source designs, one per repository: what each pin of the NE555 connects to, and the resistors, capacitors and other passives placed on it.

  • The THR pin has a capacitor to GND on 56 of 71 designs, most often 10 µF (then 1 µF).
  • The CV pin has a capacitor to GND on 50 of 71 designs, most often 10 nF (then 100 nF).
  • The TR pin has a capacitor to GND on 48 of 72 designs, most often 100 nF (then 1 µF).
  • The DIS pin has a pull-up to VCC on 42 of 71 designs, most often 1 kΩ (then 47 kΩ).
GNDpin 1Connected to: GND 94%
TRpin 2Connected to: Signal 100%
  • Capacitor to GND on 67% · 100 nF (10), 1 µF (8), 10 µF (7)
  • Series resistor on 46% · 100 kΩ (7), 1 kΩ (4), 10 kΩ (4)
Qpin 3Connected to: Signal 99%
  • Series resistor on 39% · 1 kΩ (14), 100 Ω (3), 330 Ω (3)
Rpin 4Connected to: 5V 63% · a signal 33%
CVpin 5Connected to: Signal 76% · not connected 23%
  • Capacitor to GND on 70% · 10 nF (31), 100 nF (12), 10 µF (1)
THRpin 6Connected to: Signal 89%
  • Capacitor to GND on 79% · 10 µF (15), 1 µF (11), 100 nF (4)
  • Series resistor on 45% · 100 kΩ (9), 10 kΩ (4), 1 kΩ (3)
DISpin 7Connected to: Signal 79% · not connected 15%
  • Pull-up to VCC on 59% · 1 kΩ (9), 47 kΩ (7), 10 kΩ (6)
  • Series resistor on 51% · 100 kΩ (10), 10 kΩ (7), 220 Ω (3)
VCCpin 8Connected to: 5V 90%
  • Decoupling capacitor on 41% · 100 nF (28), 330 nF (2), 10 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, Raemixx500 by SukkoPera, RC6502 Apple 1 SBC by tebl and 65C02 Computer by dbuchwald.

The NE555 in open source designs

The gallery holds 113 open source boards using the NE555 from 79 GitHub repositories; a typical one measures about 74.4 × 52.4 mm and carries around 38 components.

98% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is 8bit computer by vascofazza.

Microcontrollers on boards using the NE555

NE555: common questions

Where can I find a NE555 reference design?

Each of the 113 boards on this page is a real design using the NE555. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NE555 THR pin connected?

The THR pin has a capacitor to GND on 56 of 71 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 72 open source designs using the NE555.

How is the NE555 CV pin connected?

The CV pin has a capacitor to GND on 50 of 71 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 72 open source designs using the NE555.

How is the NE555 TR pin connected?

The TR pin has a capacitor to GND on 48 of 72 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 72 open source designs using the NE555.

What parts are used alongside the NE555?

The 74LS04, 74LS157, 74LS32, 74LS08 and 74LS245 appear in the most repositories here.

Which microcontrollers do boards using the NE555 use?

Most are built on AVR/Arduino (19), ESP32 (5), ESP8266 (1) and STM32 (1).

How big is a typical board using the NE555?

The median is 74.4 × 52.4 mm, and 98% are two-layer designs.

What is the most popular open source board using the NE555?

By GitHub stars, 8bit computer by vascofazza, with 314 stars.

Can I simulate one of these boards using the NE555 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part