Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection
Electrical-Projects·Energy-Efficient-Night-Light-with-Motion-and-Ambient-Light-Detection·Electrical-Design/KiCAD-Project/Night Light PCB.kicad_pcb
About the Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection PCB
Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection is an open source PCB design by Electrical-Projects, published on GitHub. It is a 2-layer board measuring 66.9 × 34.2 mm, with 42 components from 28 distinct parts.
Other key parts include the ICM7555xP, PIR Signal Processing, Power Regulator and NOR Gate. By type, the board carries 17 resistors, 13 capacitors, 4 ICs, 3 connectors and 2 transistors.
From the project
A motion-activated LED PCB with user-adjustable environmental light sensitivity and output delay via two onboard potentiometers. Detects motion only under desired lighting conditions (from full daylight to 0 lumens), with LED on-time adjustable from 0 to 72 seconds. No microcontroller required.
Main components on the Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection
Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection bill of materials (BOM)
42 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICM7555xP | DIP-8_W7.62mm | U1 |
| 1 | PIR Signal Processing | SOIC127P600X175-14N | U2 |
| 1 | Power Regulator | TO-92_MC_MCH | U3 |
| 1 | NOR Gate | SOT95P280X145-5N | U4 |
| 2 | 2N3904 | TO-92_Inline | Q1, Q3 |
| 2 | 691214110003 | 691214110003 | J2, J4 |
| 1 | Power Connector | JST_B2B-XH-A | J3 |
| 1 | EEAGA1A101 | CAPPRD250W45D630H700 | 100uF |
| 1 | 2M Pot - Timer (0-72s) | TRIM_3314J-1-205E | VR2 |
| 1 | 2M Pot - Light Sensitivity | TRIM_3314J-1-205E | VR3 |
| 1 | 0.01uF | CAPRR254W54L381T254H466 | C1 |
| 1 | 33uF - Timer Cap | CAPPRD350W60D800H1150 | C2 |
| 2 | 22uF | FG20X7R1C226MRT06 | C3, C11 |
| 2 | 1uF | CAPRR254W54L381T254H466 | C5, C13 |
| 1 | 22uF | CAP_CL32_SAM-L | C6 |
| 3 | 10nF | CAPRR254W54L381T254H466 | C7, C9, C10 |
| 2 | 0.1uF | CAPRR254W54L381T254H466 | C8, C14 |
| 1 | 1nF | CAPRR254W54L381T254H466 | C12 |
| 3 | 1M | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R3, R12, R14 |
| 2 | 68k | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R5, R19 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10-10M Photoresistor | PHODET_PDV-P8103 | R6 |
| 1 | 1 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R7 |
| 2 | 100k | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R8, R9 |
| 1 | 47k | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R10 |
| 2 | 22k | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R11, R13 |
| 1 | 1k | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R15 |
| 2 | 39k | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R16, R18 |
| 2 | 300 | STA_RNMF14_STP | R17, R20 |
Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection design files
The KiCad project lives in the Electrical-Projects/Energy-Efficient-Night-Light-with-Motion-and-Ambient-Light-Detection repository on GitHub; these links point at the commit this page was built from.
Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection: common questions
How big is the Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection PCB?
The Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection measures 66.9 × 34.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection?
42 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection design files?
From the Electrical-Projects/Energy-Efficient-Night-Light-with-Motion-and-Ambient-Light-Detection repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection design in my own project?
The repository has no license, so all rights stay with Electrical-Projects. Use it as a reference, and ask the author before reusing the design.