PUYA Prototype
About the PUYA Prototype PCB
PUYA Prototype is an open source PCB design by ElectronicCats, published on GitHub. It is a 2-layer board measuring 19.3 × 31.8 mm, with 12 components from 11 distinct parts.
Other key parts include the PY32F002AA15M6TU and AP2112K-3.3TRG1. By type, the board carries 3 connectors, 3 capacitors, 2 ICs, 2 resistors, 1 switch and 1 diode.
From the project
PUYA Projects
- MCU Core – 32-bit Arm Cortex-M0+ @ 24 MHz - Memory – 3KB SRAM - Storage – 20KB flash - Peripherals: - 5 GPIOs (PF0, PA1, PA5, PA6, PA7) - 1x USART - 1x I2C, 1x SPI, 1x PWM (PA1 AF13 TIM1_CH4) - Up to 9-channel 12-bit ADC - Timers - 1x general-purpose 16-bit timers - 1x 16-bit advanced control timer - 1x low-power timer (LPTIM) to support wake-up from stop mode - 1x SysTick timer - 1x watchdog timers (IWDT) - Clocks - 4/24MHz RC (HSI) - 32.768KHz RC (LSI) - 4~24MHz HSE (External crystal oscillator) - Supply Voltage – 1.7V to 5.5V DC - Packages – SOP8 (4.9×3.7×1.75 mm), SOP16, ESSOP10…
Main components on the PUYA Prototype
PUYA Prototype bill of materials (BOM)
12 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PY32F002AA15M6TU | PY32F002AA15M | U1 |
| 1 | AP2112K-3.3TRG1 | TSOT-23-5 | U2 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | L_Terminal | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | R_Terminal | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | SW_RST | SW_SPST_TL3342 | SW1 |
| 1 | ON | LED_0805_2012Metric | D1 |
| 2 | 1uF | C_0805_2012Metric | C1, C2 |
| 1 | 0.1uF | C_0805_2012Metric | C3 |
| 1 | 330R | R_0805_2012Metric | R1 |
| 1 | 10K | R_0805_2012Metric | R2 |
PUYA Prototype design files
The KiCad project lives in the ElectronicCats/puya-projects repository on GitHub; these links point at the commit this page was built from.
PUYA Prototype: common questions
How big is the PUYA Prototype PCB?
The PUYA Prototype measures 19.3 × 31.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PUYA Prototype?
12 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the PUYA Prototype design files?
From the ElectronicCats/puya-projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PUYA Prototype design in my own project?
The repository has no license, so all rights stay with ElectronicCats. Use it as a reference, and ask the author before reusing the design.
