PUYA Prototype PY32F030F28P6TU
About the PUYA Prototype PY32F030F28P6TU PCB
PUYA Prototype PY32F030F28P6TU is an open source PCB design by ElectronicCats, published on GitHub. It is a 2-layer board measuring 21.4 × 26.5 mm, with 14 components from 9 distinct parts.
Other key parts include the XC6220B331MR-G and PY32F030F28P6TU. By type, the board carries 5 capacitors, 3 connectors, 2 ICs, 2 switches and 2 resistors.
From the project
PUYA Projects
- MCU Core – 32-bit Arm Cortex-M0+ @ 24 MHz - Memory – 3KB SRAM - Storage – 20KB flash - Peripherals: - 5 GPIOs (PF0, PA1, PA5, PA6, PA7) - 1x USART - 1x I2C, 1x SPI, 1x PWM (PA1 AF13 TIM1_CH4) - Up to 9-channel 12-bit ADC - Timers - 1x general-purpose 16-bit timers - 1x 16-bit advanced control timer - 1x low-power timer (LPTIM) to support wake-up from stop mode - 1x SysTick timer - 1x watchdog timers (IWDT) - Clocks - 4/24MHz RC (HSI) - 32.768KHz RC (LSI) - 4~24MHz HSE (External crystal oscillator) - Supply Voltage – 1.7V to 5.5V DC - Packages – SOP8 (4.9×3.7×1.75 mm), SOP16, ESSOP10…
Main components on the PUYA Prototype PY32F030F28P6TU
PUYA Prototype PY32F030F28P6TU bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6220B331MR-G | SOT-23-5 | U1 |
| 1 | PY32F030F28P6TU | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 2 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J2, J3 |
| 1 | RESET | TS1088R02026 | SW1 |
| 1 | BOOT | TS1088R02026 | SW2 |
| 3 | 10uF | C_0603_1608Metric | C1, C2, C3 |
| 2 | 100nF | C_0603_1608Metric | C4, C5 |
| 2 | 10K | R_0603_1608Metric | R1, R3 |
PUYA Prototype PY32F030F28P6TU design files
The KiCad project lives in the ElectronicCats/puya-projects repository on GitHub; these links point at the commit this page was built from.
PUYA Prototype PY32F030F28P6TU: common questions
How big is the PUYA Prototype PY32F030F28P6TU PCB?
The PUYA Prototype PY32F030F28P6TU measures 21.4 × 26.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PUYA Prototype PY32F030F28P6TU?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the PUYA Prototype PY32F030F28P6TU design files?
From the ElectronicCats/puya-projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PUYA Prototype PY32F030F28P6TU design in my own project?
The repository has no license, so all rights stay with ElectronicCats. Use it as a reference, and ask the author before reusing the design.
