Spark tboi
emb3rcia·spark-tboi·KiCad Project Files/spark-tboi.kicad_pcb
About the Spark tboi PCB
Spark tboi is an open source STM32 PCB design by emb3rcia, published on GitHub. It is a 4-layer board measuring 155.4 × 101.8 mm, with 40 components from 17 distinct parts.
Its main chip is the STM32F103C8T7, from the STM32 family. By type, the board carries 8 capacitors, 5 resistors, 1 IC, 1 crystal and 1 LED.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
The Binding of Isaac: Repentance dedicated small footprint macropad/keyboard with display and auto clicking capability to reduce strain on arms.
spark-tboi is small-footprint keyboard/macropad with autoclicking capabilities and hot-swappable switches for The Binding of Isaac: Repentance+
spark-debug was created to reduce strain on arms that happens when spam-clicking arrow keys with items such as Spirit Sword or Chocolate Milk
I added humorous silkscreen text as this project lacks personality without them in my opinion.

Main components on the Spark tboi
Spark tboi bill of materials (BOM)
40 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T7 | QFP50P900X900X160-48N | IC1 |
| 1 | ABMM2-8.000MHZ-E2-T | ABMM2 | Y1 |
| 1 | AMS1117-3.3_C917183 | SOT-223-3_L6.7-W3.7-P2.30-LS7.0-BR | 3V3_LDO1 |
| 2 | TS6643TP 250GF 009 | SW-SMD_4P-L6.2-W6.0-P4.50-LS9.0 | BOOT_BUTTON1, NRST_BUTTON1 |
| 2 | RCLAMP0502BATCT | SC-75-3_L1.6-W0.8-P1.00-LS1.6-BR | CC_TVS1, DATA_TVS1 |
| 15 | KS33_SW_HS | SW_MX_HS_CPG151101S11_1u | CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8 +7 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E_Vertical_H20mm | ENCODER1 |
| 1 | Conn_01x03_Pin | SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | UART1 |
| 1 | TYPE-C 16PIN 2MD(073) | USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | SMBJ5.0A_C83333 | SMB_L4.6-W3.6-LS5.3-RD | VBUS_TVS1 |
| 1 | Conn_01x04_Pin | SSD1306-0.91-OLED-4pin-128x32 | OLED1 |
| 1 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 4 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C6, C7 |
| 2 | 18pF | C_0402_1005Metric | C3, C8 |
| 1 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 3 | 4.7kOhm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 5.1kOhm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
Spark tboi design files
The KiCad project lives in the emb3rcia/spark-tboi repository on GitHub; these links point at the commit this page was built from.
Spark tboi: common questions
What microcontroller does the Spark tboi use?
The Spark tboi is built around the STM32F103C8T7, from the STM32 family.
How big is the Spark tboi PCB?
The Spark tboi measures 155.4 × 101.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Spark tboi?
40 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Spark tboi design files?
From the emb3rcia/spark-tboi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Spark tboi design in my own project?
The repository has no license, so all rights stay with emb3rcia. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Spark tboi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k