Stm32-module
emb3rcia·stm32-module·PCB/stm32-module.kicad_pcb
About the Stm32-module
Stm32-module is an open source STM32 PCB design by emb3rcia, published on GitHub. It is a 4-layer board measuring 45.5 × 78.5 mm, with 26 components from 13 distinct parts.
Its main chip is the STM32H7B0RBT6, from the STM32 family. By type, the board carries 12 capacitors, 3 connectors, 3 resistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
My first MCU module! Made for HackClub's Blueprint! Supports USB-C and gives 66 gold pins, 2 of which are 1.8V!
I thought it will be good learning project as well as giving me access to prototyping with mcu before commiting to making pcb. And i was right!
Mainly how to deal with tight connection layout on PCB near MCU
PCB v1 (old, view via kicanvas so low quality screenshot, sorry)
It is my second completed project overall. Also they weren't like high speed eg pcie so I just connected them as well as I can! I will try to make them nicer before production, but no promises. EDIT: Tried to make them nicer when rerouting everything, it worked like you can see.

Main components on the Stm32-module
Stm32-module bill of materials (BOM)
26 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H7B0RBT6 | QFP50P1200X1200X160-64N | MCU1 |
| 2 | Conn_01x30_Socket | PinHeader_1x30_P2.54mm_Vertical | J1, J2 |
| 1 | TYPE-C_16PIN_2MD__073_ | SHOUHAN_TYPE-C_16PIN_2MD__073_ | J3 |
| 1 | TPS73618QDCQRQ1 | SOT127P706X180-6N | 1.8VLDO1 |
| 1 | BL8072CLTR33 | SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | 3.3VLDO1 |
| 2 | TS6643TP 250GF 009 | SW-SMD_4P-L6.2-W6.0-P4.50-LS9.0 | BOOT_BUTTON1, RESET_BUTTON1 |
| 2 | RCLAMP0502BATCT | SOT50P160X90-3N | CCESD1, DATAESD1 |
| 1 | SMA6L5.0A/TR13 SMA6L5.0A_TR13 | SODFL4626X140N | VBUSESD1 |
| 7 | 100nF 10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C6, C7, C9, C11, C12 |
| 3 | 1uF 10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C13, C14 |
| 2 | 2.2uF 10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C10 |
| 2 | 5.1kOhm 0.1W | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 10kOhm 0.1W | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
Stm32-module design files
The KiCad project lives in the emb3rcia/stm32-module repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/stm32-module.kicad_pcb
- SchematicPCB/stm32-module.kicad_sch
- BOMbom.csv
Stm32-module: common questions
What microcontroller does the Stm32-module use?
The Stm32-module is built around the STM32H7B0RBT6, from the STM32 family.
How big is the Stm32-module?
The Stm32-module measures 45.5 × 78.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Stm32-module?
26 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32-module design files?
From the emb3rcia/stm32-module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm32-module design in my own project?
The repository has no license, so all rights stay with emb3rcia. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32-module without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k