Turnsignals
emb3rcia·turnsignals·PCB/turnsignals.kicad_pcb
About the Turnsignals PCB
Turnsignals is an open source STM32 PCB design by emb3rcia, published on GitHub. It is a 2-layer board measuring 31.6 × 34.2 mm, with 22 components from 14 distinct parts.
Its main chip is the STM32F042K6T6, from the STM32 family. Other key parts include the TS6643TP 250GF 009. By type, the board carries 7 capacitors, 7 resistors, 2 ICs and 1 switch.
From the project
Turnsignals for pc steering wheels
Hello! This project is very simple, but to some people may be very needed, this is turnsignals module for PC steering wheels like logitech g29, made for HackClub's Blueprint program. It features USB-C (USB-FS standard) port for data and power and ESD protection on VBUS, DATA channels and CC channels! Firmware is given as whole STM32CubeIDE project. It is generated in STM32CubeMX and then the rest written in STM32CubeIDE

Main components on the Turnsignals
Turnsignals bill of materials (BOM)
22 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F042K6T6 | QFP80P900X900X160-32N | MCU1 |
| 1 | TS6643TP 250GF 009 | SW-SMD_4P-L6.2-W6.0-P4.50-LS9.0 | U1 |
| 2 | RCLAMP0502BATCT | SOT50P160X90-3N | CCESD1, DATAESD1 |
| 1 | SMA6L5.0A/TR13 SMA6L5.0A_TR13 | SODFL4626X140N | DVBUSESD1 |
| 1 | MCP1726-3302E/SN MCP1726-3302E_SN | SOIC127P600X175-8N | LDO1 |
| 1 | ~ | SW-TH_1MS1T1B1M1QES-5 | SW1 |
| 1 | TYPE-C_16PIN_2MD__073_ | SHOUHAN_TYPE-C_16PIN_2MD__073_ | USB-C1 |
| 4 | 100nF 10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C5 |
| 2 | 1uF 10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C7 |
| 1 | 4.7uF 16V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 2 | 330Ohm 0.1W | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 10kOhm 0.1W | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 2 | 5.1kOhm 0.1W | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 10kOhm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
Turnsignals design files
The KiCad project lives in the emb3rcia/turnsignals repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/turnsignals.kicad_pcb
- SchematicPCB/turnsignals.kicad_sch
- BOMBOM.csv
Turnsignals: common questions
What microcontroller does the Turnsignals use?
The Turnsignals is built around the STM32F042K6T6, from the STM32 family.
How big is the Turnsignals PCB?
The Turnsignals measures 31.6 × 34.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Turnsignals?
22 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Turnsignals design files?
From the emb3rcia/turnsignals repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Turnsignals design in my own project?
The repository has no license, so all rights stay with emb3rcia. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Turnsignals without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k