Vehicle Accessory Controller Test Board
About the Vehicle Accessory Controller Test Board
Vehicle Accessory Controller Test Board is an open source PCB design by EmbeddedDesign, published on GitHub. It is a 4-layer board measuring 55 × 44 mm, with 48 components from 28 distinct parts.
Other key parts include the TPS3710, SI8710CC-B-IS, CP2102N-A02-GQFN24 and Si8621BB-B-IS. By type, the board carries 21 resistors, 10 capacitors, 6 connectors, 4 ICs, 4 diodes and 2 transistors.
From the project
Vehicle Dash Cam and Accessory Controller
Main components on the Vehicle Accessory Controller Test Board
Vehicle Accessory Controller Test Board bill of materials (BOM)
48 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS3710 | TI DSE (S-PWSON-N6) | U103 |
| 1 | SI8710CC-B-IS | SOIC-8_NB | U104 |
| 1 | CP2102N-A02-GQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U105 |
| 1 | Si8621BB-B-IS | SOIC-8_3.9x4.9mm_P1.27mm | U106 |
| 2 | BSS138 | SOT-23 | Q201, Q202 |
| 1 | Input | Keystone_8719 | J501 |
| 1 | Front Conn | Keystone_8719 | J502 |
| 1 | Rear Conn | Keystone_8719 | J503 |
| 1 | USB_Mini-B | AFCI_10033526_USB-mini | J506 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J507 |
| 1 | Conn_01x08_Male | PinHeader_1x08_P2.54mm_Vertical | J508 |
| 1 | ON/OFF | C&K_ET_Series_Switch | SW301 |
| 3 | LED_ALT | LED_0603 | D601, D603, D604 |
| 1 | SP0503BAHT | SOT-143 | D605 |
| 7 | 0.1uF | C_0603 | C804, C805, C807, C809, C811, C812, C813 |
| 2 | 4.7uF | C_0603 | C806, C808 |
| 1 | 0.1nF | C_0603 | C810 |
| 1 | 2M43 | R_0603 | R703 |
| 1 | 84k5 | R_0603 | R704 |
| 1 | 49k9 | R_0603 | R705 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 430R | R_0603 | R706 |
| 5 | 1k | R_0603 | R708, R709, R724, R726, R728 |
| 3 | 1M | R_0603 | R712, R713, R727 |
| 3 | 22k1 | R_0603 | R716, R717, R731 |
| 2 | 30k9 | R_0603 | R720, R721 |
| 1 | 160R | R_0603 | R725 |
| 2 | 90R | R_0603 | R729, R730 |
| 1 | 47k5 | R_0603 | R732 |
Vehicle Accessory Controller Test Board design files
The KiCad project lives in the EmbeddedDesign/VehicleAccessoryController repository on GitHub; these links point at the commit this page was built from.
Vehicle Accessory Controller Test Board: common questions
How big is the Vehicle Accessory Controller Test Board?
The Vehicle Accessory Controller Test Board measures 55 × 44 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Vehicle Accessory Controller Test Board?
48 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vehicle Accessory Controller Test Board design files?
From the EmbeddedDesign/VehicleAccessoryController repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Vehicle Accessory Controller Test Board design in my own project?
The repository has no license, so all rights stay with EmbeddedDesign. Use it as a reference, and ask the author before reusing the design.
