47 open source boards using the CP2102N-A02-GQFN24

Real designs built with the CP2102N-A02-GQFN24, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

47 boardsClear filters|Most starred

How designs wire the CP2102N-A02-GQFN24

Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the CP2102N-A02-GQFN24 connects to, and the resistors, capacitors and other passives placed on it.

  • The WAKEUP/GPIO.3 pin is left unconnected on 22 of 24 designs.
  • The RS485/GPIO.2 pin is left unconnected on 22 of 24 designs (a signal on 2).
  • The RI/CLK pin is left unconnected on 21 of 24 designs (a signal on 2).
  • The VIO pin has a decoupling capacitor on 17 of 24 designs, most often 100 nF (then 4.7 µF).
RI/CLKpin 1Connected to: Not connected 88%
GNDpin 2, 25Connected to: GND 92%
VIOpin 5Connected to: 3.3V 71% · a signal 25%
  • Decoupling capacitor on 71% · 100 nF (23), 4.7 µF (13), 1 µF (4)
VDDpin 6Connected to: 3.3V 71% · a signal 25%
  • Decoupling capacitor on 71% · 100 nF (23), 4.7 µF (14), 1 µF (4)
VREGINpin 7Connected to: 3.3V 88%
  • Decoupling capacitor on 71% · 100 nF (22), 4.7 µF (13), 10 µF (4)
VBUSpin 8Connected to: Signal 67% · 5V 33%
  • Resistor to GND on 58% · 47.5 kΩ (10), 27 kΩ (1), 43 kΩ (1)
  • Pull-up to VBUS on 50% · 22.1 kΩ (7), 12 kΩ (1), 22 kΩ (1)
RSTpin 9Connected to: Signal 83%
  • Pull-up to 3.3V on 67% · 1 kΩ (13), 100 kΩ (1), 4.7 kΩ (1)
NCpin 10, 16Connected to: Not connected 94%
WAKEUP/GPIO.3pin 11Connected to: Not connected 92%
RS485/GPIO.2pin 12Connected to: Not connected 92%
RXT/GPIO.1pin 13Connected to: Not connected 71% · a signal 29%
TXT/GPIO.0pin 14Connected to: Not connected 63% · a signal 38%
SUSPENDpin 15, 17Connected to: Not connected 83% · a signal 17%
CTSpin 18Connected to: Not connected 79%
RTSpin 19Connected to: Signal 63% · not connected 38%
  • Series resistor on 50% · 10 kΩ (11), 12 kΩ (1), 0 Ω (1)
DSRpin 22Connected to: Not connected 83%
DTRpin 23Connected to: Signal 63% · not connected 38%
  • Series resistor on 50% · 10 kΩ (11), 0 Ω (1), 5.1 kΩ (1)
DCDpin 24Connected to: Not connected 79% · a signal 17%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kv4p ht by VanceVagell, Digirig Mobile by softcomplex, Nlink lite by nspired-Hackers and AnthC by Anthilla.

The CP2102N-A02-GQFN24 in open source designs

The gallery holds 47 open source boards using the CP2102N-A02-GQFN24 from 26 GitHub repositories; a typical one measures about 80 × 50.2 mm and carries around 84 components.

74% use four copper layers or more, and 23% carry an open source license.

The most starred is Kv4p ht metal case by VanceVagell.

Microcontrollers on boards using the CP2102N-A02-GQFN24

CP2102N-A02-GQFN24: common questions

Where can I find a CP2102N-A02-GQFN24 reference design?

Each of the 47 boards on this page is a real design using the CP2102N-A02-GQFN24. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CP2102N-A02-GQFN24 WAKEUP/GPIO.3 pin connected?

The WAKEUP/GPIO.3 pin is left unconnected on 22 of 24 designs. Counted from the KiCad layouts of 24 open source designs using the CP2102N-A02-GQFN24.

How is the CP2102N-A02-GQFN24 RS485/GPIO.2 pin connected?

The RS485/GPIO.2 pin is left unconnected on 22 of 24 designs (a signal on 2). Counted from the KiCad layouts of 24 open source designs using the CP2102N-A02-GQFN24.

How is the CP2102N-A02-GQFN24 RI/CLK pin connected?

The RI/CLK pin is left unconnected on 21 of 24 designs (a signal on 2). Counted from the KiCad layouts of 24 open source designs using the CP2102N-A02-GQFN24.

What parts are used alongside the CP2102N-A02-GQFN24?

The USBLC6-2SC6, AZ1117H-3.3TRG1, ESP32-S3-WROOM-1, ESP32-WROOM-32E-N4 and LTC3111EMSEPBF appear in the most repositories here.

Which microcontrollers do boards using the CP2102N-A02-GQFN24 use?

Most are built on ESP32 (35), RP2040/RP2350 (3), PIC (2) and STM32 (2).

How big is a typical board using the CP2102N-A02-GQFN24?

The median is 80 × 50.2 mm, and 26% are two-layer designs.

What is the most popular open source board using the CP2102N-A02-GQFN24?

By GitHub stars, Kv4p ht metal case by VanceVagell, with 827 stars.

Can I simulate one of these boards using the CP2102N-A02-GQFN24 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part